首頁>K246A-DL006N-2AT1B>規格書詳情
K246A-DL006N-2AT1B中文資料宏發科技數據手冊PDF規格書
K246A-DL006N-2AT1B規格書詳情
Application Notes
1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply.
2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 50ms minimum to ensure a proper change of state. DO NOT energize both T1 and T3 at the same time on a Dual Coil or energize the coil for longer than 1 minute (damage to the coil could occur).
3. Applying excessive heat to the relay terminals (soldering or welding) can cause damage to the internal structure of the relay and should be avoided.
4. Moving or bending the terminals can cause damage to the internal structure of the relay and should be avoided.
5. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.
供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
---|---|---|---|---|---|---|---|
TOSHIBA/東芝 |
22+ |
TO-92 |
64900 |
原裝進口現貨支持實單 |
詢價 | ||
FUJI |
TO-3P |
68900 |
原包原標簽100%進口原裝常備現貨! |
詢價 | |||
NA |
8560 |
一級代理 原裝正品假一罰十價格優勢長期供貨 |
詢價 | ||||
TOSHIBA |
6000 |
面議 |
19 |
TO-92 |
詢價 | ||
TOSHIBA/東芝 |
22+ |
TO-92 |
50000 |
原裝正品.假一罰十 |
詢價 | ||
FUJI |
2020+ |
TO-220F |
16800 |
絕對原裝進口現貨,假一賠十,價格優勢!? |
詢價 | ||
FUJI/富士電機 |
21+ |
TO-3P |
10000 |
原裝現貨假一罰十 |
詢價 | ||
東芝 |
24+ |
TO-92 |
12000 |
詢價 | |||
FUJI/富士電機 |
23+ |
TO-3P |
6000 |
原裝正品,支持實單 |
詢價 | ||
FUJI/富士電機 |
22+ |
TO-3P |
25000 |
只做原裝進口現貨,專注配單 |
詢價 |