首頁>K268A-SV012P-2BT>規格書詳情
K268A-SV012P-2BT中文資料宏發科技數據手冊PDF規格書
K268A-SV012P-2BT規格書詳情
Application Notes
1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply.
2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should be 50ms minimum to ensure a proper change of state. DO NOT energize both T1 and T3 at the same time on a Dual Coil or energize the coil for longer than 1 minute (damage to the coil could occur).
3. Applying excessive heat to the relay terminals (soldering or welding) can cause damage to the internal structure of the relay and should be avoided.
4. Moving or bending the terminals can cause damage to the internal structure of the relay and should be avoided.
5. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
FUJI |
24+ |
TO-3P |
16800 |
絕對原裝進口現貨,假一賠十,價格優勢!? |
詢價 | ||
TOS |
19+ |
TO-3P |
75983 |
原廠代理渠道,每一顆芯片都可追溯原廠； |
詢價 | ||
TOSHIBA |
23+ |
TO-3P |
5000 |
原裝正品,假一罰十 |
詢價 | ||
TECCOR |
24+ |
NO |
22 |
詢價 | |||
FUJITSU/富士通 |
22+ |
TO-3P |
25000 |
只做原裝進口現貨,專注配單 |
詢價 | ||
TOSHIBA/東芝 |
1926+ |
TO-3P |
6852 |
只做原裝正品現貨!或訂貨假一賠十! |
詢價 | ||
FUJI/富士電機 |
23+ |
TO-3P |
10000 |
公司只做原裝正品 |
詢價 | ||
TOSHIBA |
23+ |
TO-3P |
7750 |
全新原裝優勢 |
詢價 | ||
FUJITSU/富士通 |
TO-3P |
22+ |
6000 |
十年配單,只做原裝 |
詢價 | ||
TOSHIBA/東芝 |
1824+ |
TO-3P |
2870 |
原裝現貨專業代理,可以代拷程序 |
詢價 |
