首頁>K303A-D009N-3BT>規格書詳情
K303A-D009N-3BT中文資料宏發科技數據手冊PDF規格書
| 廠商型號 |
K303A-D009N-3BT |
| 功能描述 | World Class Switching Solutions for Energy Management |
| 文件大小 |
243.36 Kbytes |
| 頁面數量 |
3 頁 |
| 生產廠商 | KG Technologies, Inc. |
| 企業簡稱 |
KG【宏發科技】 |
| 中文名稱 | 宏發科技股份有限公司官網 |
| 原廠標識 |  |
| 數據手冊 | |
| 更新時間 | 2025-5-24 19:10:00 |
| 人工找貨 | K303A-D009N-3BT價格和庫存，歡迎聯系客服免費人工找貨 |
K303A-D009N-3BT規格書詳情
Application Notes
Dual Coil – Positive Polarity: Place a negative connection on T2. Then apply a 50ms positive pulse to T1 to open the contacts or
to T3 to close the contacts.
Dual Coil – Negative Polarity: Place a positive connection on T2. Then apply a 50ms negative pulse to T3 to open the contacts or
to T1 to close the contacts.
Single Coil: Place a negative connection on T1. Then apply a 50ms positive pulse to T3 to close the contacts. Reversing polarity will open
the contacts.
Additional Application Notes
1: It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to
the desired state via a power supply.
2: In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should
be 50ms minimum to ensure a proper change of state. DO NOT energize both T1 and T3 at the same time on a Dual Coil or energize
the coil for longer than 1 minute (damage to the coil could incur).
3: Relays without flex-wire cannot be tin-soldered. Moving or bending the terminals could cause damage to the internal structure of
the relay.
4: For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.
