Description

The KD1084 is a LOW DROP Voltage Regulatorable to provide up to 5A of Output Current. Dropout is guaranteed at a maximum of 1.5V at the maximum output current, decreasing at lower loads. The KD1084 is pin to pin compatible with he older 3-terminal adjustable regulators but has better performances in term of drop and output tolerance. A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the KD1084 quiescent current flows into the load, so increase efficiency. Only a 10μF minimum capacitor is need for stability.

Features

■ Typical dropout 1.3V (at 5A)

■ Three terminal adjustable or fixed output voltage 1.8V, 2.5V, 3.3V.

■ Guaranteed output current up to 5A

■ Output tolerance ±1 at 25°C and ±2 in full temperature range for the A version

■ Output tolerance ±2 at 25°C and ±3 In full temperature range internal power and thermal limit

■ Wide operating temp. range -40°C to 125°C

■ Package available: TO-220, D2PAK, DPAK

■ Pinout compatibility with standard adjustable VREG

KD1084ADT33屬于集成電路（IC） > 線性 + 開關穩壓器。意法半導體（ST）集團制造生產的KD1084ADT33穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。