KSD1412S工業自動化與控制的延時繼電器規格書PDF中文資料

Description

The KSD1 Series features two-terminal, series-connection

with the load. The KSD1 Series is an ideal choice for delay-onmake

timing applications. This series is designed for general

purpose commercial and industrial applications where a small,

cost effective, reliable solid-state timer is required. The factory

calibration for fixed time delays is within 5 of the target time

delay. The repeat accuracy, under stable conditions, is 0.5 of

the selected time delay. This series is designed for popular AC

and DC voltages. Time delays of 0.1 seconds to 1000 minutes

are available in 6 ranges. The output is rated 1A steady and 10A

inrush. The modules are totally solid state and encapsulated to

protect the electronic circuitry.

Operation (Delay-on-Make)

Upon application of input voltage, the time delay begins. The

output is de-energized before and during the time delay. At

the end of the time delay, the output energizes and remains

energized until input voltage is removed.

Reset: Removing input voltage resets the time delay and output.

FEATURES BENEFITS

Microcontroller based Repeat Accuracy + / - 0.5,

+ / -5 time delay accuracy

Compact, low

cost design Allows flexiblility for OEM applications

1A Steady solid-state

output, 10A inrush Provides 100 million operations in typical conditions.

Totally solid state

and encapsulated

No moving parts to arc and wear out over time and

encapsulated to protect against shock, vibration,

and humidity