KSZ8051MNLU-VAO集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

KSZ8051MNLU-VAO屬于集成電路（IC）的驅動器接收器收發器。由微芯科技股份有限公司制造生產的KSZ8051MNLU-VAO驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

General Description

The KSZ8051 is an AEC-Q100 standard qualified single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver.

The KSZ8051 is a highly integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core.

The KSZ8051MNL offers the Media Independent Interface (MII) and the KSZ8051RNL offers the Reduced Media Independent Interface (RMII) for direct connection with MII-/RMII-compliant Ethernet MAC processors and switches.

Features

? Single-Chip 10BASE-T/100BASE-TX IEEE 802.3 Compliant Ethernet Transceiver

? AEC-Q100 Qualified for Automotive Applications

? MII Interface Support (KSZ8051MNL)

? RMII v1.2 Interface Support with a 50 MHz Reference Clock Output to MAC, and an Option to Input a 50 MHz Reference Clock (KSZ8051RNL)

? Back-to-Back Mode Support for a 100 Mbps Copper Repeater

? MDC/MDIO Management Interface for PHY Register Configuration

? Programmable Interrupt Output

? LED Outputs for Link, Activity, and Speed Status Indication

? On-Chip Termination Resistors for the Differential Pairs

? Baseline Wander Correction

? HP Auto MDI/MDI-X to Reliably Detect and Correct Straight-Through and Crossover Cable Connections with Disable and Enable Option

? Auto-Negotiation to Automatically Select the Highest Link-Up Speed (10/100 Mbps) and Duplex (Half/Full)

? Power-Down and Power-Saving Modes

? LinkMD? TDR-Based Cable Diagnostics to Identify Faulty Copper Cabling

? Parametric NAND Tree Support for Fault Detection Between Chip I/Os and the Board

? Loopback Modes for Diagnostics

? Single 3.3V Power Supply with VDD I/O Options for 1.8V, 2.5V, or 3.3V

? Built-In 1.2V Regulator for Core

? Available in 32-pin 5 mm x 5 mm QFN Package

Target Applications

? Automotive In-Vehicle Networking