KSZ8765CLXCC集成電路（IC）的控制器規格書PDF中文資料

KSZ8765CLXCC屬于集成電路（IC）的控制器。由微芯科技股份有限公司制造生產的KSZ8765CLXCC控制器該系列產品主要用于在采用不同通信協議和/或信令方法的端點之間提供信息連接。示例包括將 I2C 總線連接到 UART，將 USB 連接到 I2C、SPI、以太網或 UART、以太網 MAC 和 PHY 等的器件。此外，還包括用于通過為點對點通信設計的接口建立多路連接的器件，例如 USB 集線器控制器。

INTRODUCTION

General Description

The KSZ8765CLX is a highly integrated, Layer 2-managed, five-port switch with numerous features designed to reduce overall system cost. It is intended for cost-sensitive applications requiring four 10/100 Mbps copper ports and one 10/100/1000 Mbps Gigabit uplink port. The KSZ8765CLX incorporates a small package outline, the lowest power consumption with internal biasing, and on-chip termination. Its extensive set of features include enhanced power management, programmable rate limiting and priority ratio, tagged and port-based VLAN, port-based security and ACL rule-based packet filtering technology, QoS priority with four queues, management interfaces, enhanced MIB counters, high-performance memory bandwidth, and a shared memory-based switch fabric with non-blocking support. The KSZ8765CLX provides support for multiple CPU data interfaces to effectively address both current and emerging fast Ethernet and Gigabit Ethernet applications where the Port 5 GMAC can be configured to any of the GMII, RGMII, MII, and RMII modes.

The KSZ8765CLX is built upon industry-leading Ethernet analog and digital technology, with features designed to off load host processing and streamline the overall design.

? Two integrated MAC/PHYs 100BASE-FX on Port 1 and Port 2

? Two integrated MAC/PHYs 10/100BASE-T/TX on Port 3 and Port 4

? One integrated 10/100/1000BASE-T/TX GMAC with selectable GMII, RGMII, MII, and RMII interfaces

? Small 80-pin LQFP package

A robust assortment of power-management features including Energy Efficient Ethernet (EEE), power management event (PME), and Wake-on-LAN (WoL) have been designed-in to satisfy energy-efficient environments.

All registers in the MAC/PHY units can be managed through the SPI interface. MIIM PHY registers can be accessed through the MDC/MDIO interface.

Target Applications

? Industrial Ethernet Applications that Employ IEEE 802.3-Compliant MACs. (Ethernet/IP, Profinet, MODBUS TCP, etc.)

? VoIP Phone

? Set-Top/Game Box

? Automotive

? Industrial Control

? IPTV POF

? SOHO Residential Gateway with Full-Wire Speed of Four LAN Ports

? Broadband Gateway/Firewall/VPN

? Integrated DSL/Cable Modem

? Wireless LAN Access Point + Gateway

? Standalone 10/100 Switch

? Networked Measurement and Control Systems