KSZ8895FMQ集成電路（IC）的控制器規(guī)格書PDF中文資料

General Description

The KSZ8895MQ/RQ/FMQ is a highly-integrated, Layer 2 managed, five-port switch with numerous features designed to reduce system cost. Intended for cost-sensitive 10/100Mbps five-port switch systems with low power consumption, on-chip termination, and internal core power controllers, it supports high-performance memory bandwidth and shared memory-based switch fabric with non-blocking configuration.

Features

Advanced Switch Features

? IEEE 802.1q VLAN support for up to 128 active VLAN groups (full-range 4096 of VLAN IDs).

? Static MAC table supports up to 32 entries.

? VLAN ID tag/untag options, per port basis

? IEEE 802.1p/q tag insertion or removal on a per port basis based on ingress port (egress).

? Programmable rate limiting at the ingress and egress on a per port basis.

? Jitter-free per packet based rate limiting support.

? Broadcast storm protection with percentage control (global and per port basis).

? IEEE 802.1d rapid spanning tree protocol RSTP support.

? Tail tag mode (1 byte added before FCS) support at Port 5 to inform the processor which ingress port receives the packet.

? 1.4Gbps high-performance memory bandwidth and shared memory-based switch fabric with fully non-blocking configuration.

? Dual MII with MAC5 and PHY5 on port 5, SW5-MII/RMII for MAC 5 and P5-MII/RMII for PHY 5.

? Enable/Disable option for huge frame size up to 2000 Bytes per frame.

? IGMP v1/v2 snooping (Ipv4) support for multicast packet filtering.

? IPv4/IPv6 QoS support.

? Support unknown unicast/multicast address and unknown VID packet filtering.

? Self-address filtering.

(Continue ...)

Applications

? VoIP phone

? Set-top/game box

? Automotive

? Industrial control

? IPTV POF

? SOHO residential gateway

? Broadband gateway/firewall/VPN

? Integrated DSL/cable modem

? Wireless LAN access point + gateway

? Standalone 10/100 switch