INTRODUCTION

The L9805 is a Super Smart Power device suited to drive resistive and inductive loads under software control. It includes a ST7 microcontroller and some pheripherals. The microcontroller can execute the software contained in the program EPROM/ROM and drive, through dedicated registers, the power bridge.

The internal voltage regulators rated to the automotive environment, PWM modules, CAN transceiver and controller, ISO 9141 transceiver, timers, temperature sensor and the AtoD converter allow the device to realize by itself a complete application, in line with the most common mechatronic requirements.

■ 6.4-18V Supply Operating Range

■ 16 MHz Maximum Oscillator Frequency

■ 8 MHz Maximum Internal Clock Frequency

■ Oscillator Supervisor

■ Fully Static operation

■ -40°C to + 150°C Temperature Range

■ User EPROM/OTP: 16 Kbytes

■ Data RAM: 256 bytes

■ Data EEPROM: 128 bytes

■ 64 pin HiQUAD64 package

■ 10 multifunctional bidirectional I/O lines

■ Two 16-bit Timers, each featuring:

– 2 Input Captures

– 2 Output Compares

– External Clock input (on Timer 1)

– PWM and Pulse Generator modes

■ Two Programmable 16-bit PWM generator modules.

■ CAN peripheral including Bus line interface according 2A/B passive specifications

■ 10-bit Analog-to-Digital Converter

■ Software Watchdog for system integrity

■ Master Reset, Power-On Reset, Low Voltage Reset

■ 70m? DMOS H-bridge.

■ 8-bit Data Manipulation

■ 63 basic Instructions and 17 main Addressing Modes

■ 8 x 8 Unsigned Multiply Instruction

■ True Bit Manipulation

■ Complete Development Support on DOS/ WINDOWSTM Real-Time Emulator

■ Full Software Package on DOS/WINDOWSTM (C-Compiler, Cross-Assembler, Debugger)

L9805屬于集成電路（IC） > 電機驅動器，控制器。意法半導體（ST）集團制造生產的L9805電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。