L99MOD51XP集成電路（IC）的專用IC規格書PDF中文資料

L99MOD51XP屬于集成電路（IC）的專用IC。由意法半導體集團制造生產的L99MOD51XP專用 IC專用專用集成電路 (IC) 或芯片設計用于執行特定功能。這個類別包括可尋址開關、空芯儀表驅動器、音視頻開關、驗證芯片、自動放電、時鐘發生器、彩色掃描儀，以及各種應用所用的其他許多集成電路。

Features

? AEC-Q100 qualified

? One half bridge for 7.4 A load

(RDSon = 150 mΩ)

? Two half bridges for 5 A load (RDSon = 200 mΩ)

? Two high-side drivers for 1.25 A load

(RDSon = 800 mΩ)

? Programmable soft start function to drive loads

with higher inrush currents (i.e.current > 7 .4 A,

>5 A, >1.25 A)

? Very low current consumption in standby mode

(IS < 3 μA, typ., Tj ? 85 °C)

? All outputs short circuit protected

? Current monitor output for all high-side drivers

? All outputs over temperature protected

? Open-load diagnostic for all outputs

? Overload diagnostic for all outputs

? Programmable PWM control of all outputs

? Charge pump output for reverse polarity

protection

Description

The L99MOD51XP is a microcontroller-driven multifunctional actuator driver for automotive applications. Up to two DC motors and two grounded resistive loads can be driven with three half bridges and two hide-side drivers.

The integrated SPI controls all operation modes (forward, reverse, brake and high impedance).

Also, all diagnostic information is available via SPI read.

Applications

L99MOD devices are recommended for those applications that need multiple motors control with additional loads in high-side configuration, such as bulbs/LEDs ors requiring protected supply, like sensors or cameras.