LC5823中文資料三洋數(shù)據(jù)手冊(cè)PDF規(guī)格書

Overview

The LC5822, LC5823, and LC5824 are CMOS microcontrollers that feature the low-voltage operation required for battery-power applications and that provide 4 KB, 6 KB, or 8 KB of ROM, 1 kilobit of RAM, and an LCD driver.

Features

? These microcontrollers are high-end versions of the LC5800 and provide the following features.

Low Current Drain * In halt mode (typical)

? Ceramic oscillator 400 kHz (3.0 V) 200 μA

? Crystal oscillator 32 kHz (1.5 V, Ag specifications) 3.0 μA (LCD biases other than 1/3) 4.5 μA (LCD drive: 1/3 bias)

? Crystal oscillator 32 kHz (3.0 V, Li specifications) 2.0 μA (LCD biases other than 1/3) 6.0 μA (LCD drive: 1/3 bias)

Timer and Counter Functions

? One 8-bit programmable timer (May be used as an event counter)

? One 8-bit programmable reload timer

? Time base timer (for clocks)

? Watchdog timer

? 8-bit serial I/O (3-pin synchronous system)

Standby Functions

? Clock standby function (halt mode)

Only the oscillator circuits, the divider circuit, and the LCD driver operate. All other internal operations are stopped. This provides a power-saving function in which current drain is minimized, and allows a clock function to be implemented easily with low power dissipation.

Furthermore, low-speed and high-speed modes can be implemented by setting the operating modes of the two oscillator circuits.

? Full standby function (hold mode)

? Halt mode can be cleared by any of two external and two internal interrupts.

Applications

? LCD display in multi-function watches, timers, and other products

? Control and LCD display in timers

? Control and LCD display in miniature test equipment, health maintenance equipment, and other products

? These microcontrollers are optimal for products that include an LCD display, especially battery powered products.