LC75817W中文資料三洋數(shù)據(jù)手冊PDF規(guī)格書

Overview

The LC75817E and LC75817W are 1/8 to 1/10 duty dot matrix LCD display controller/drivers that supports the display of characters, numbers, and symbols. In addition to generating dot matrix LCD drive signals based on data transferred serially from a microcontroller, the LC75817E and LC75817W also provide on-chip character display ROM and RAM to allow display systems to be implemented easily. These products also provide up to 4 general-purpose output ports and incorporate a key scan circuit that accepts input from up to 30 keys to reduce printed circuit board wiring.

Features

? Key input function for up to 30 keys (A key scan is performed only when a key is pressed.)

? Controls and drives a 5 × 7, 5 × 8, or 5 × 9 dot matrix LCD.

? Supports accessory display segment drive (up to 60 segments)

? Display technique:

1/8 duty 1/4 bias drive (5 × 7 dots)

1/9 duty 1/4 bias drive (5 × 8 dots)

1/10 duty 1/4 bias drive (5 × 9 dots)

? Display digits:

12 digits × 1 line (5 × 7 dots, 5 × 8 dots)

11 digits × 1 line (5 × 9 dots)

? Display control memory

CGROM: 240 characters (5 × 7, 5 × 8, or 5 × 9 dots)

CGRAM: 16 characters (5 × 7, 5 × 8, or 5 × 9 dots)

ADRAM: 12 × 5 bits

DCRAM: 48 × 8 bits

? Instruction function

Display on/off control

Display shift function

? Sleep mode can be used to reduce current drain.

? Built-in display contrast adjustment circuit

? Up to 4 general-purpose output ports are included.

? Serial data I/O supports CCB format communication with the system controller.

? Independent LCD drive block power supply VLCD

? A voltage detection type reset circuit is provided to initialize the IC and prevent incorrect display.

? The INH pin is provided. This pin turns off the display, disables key scanning, and forces the general-purpose output ports to the low level.

? RC oscillator circuit