LC8390M中文資料三洋數(shù)據(jù)手冊(cè)PDF規(guī)格書

Overview

The LC8390M combines two-channel D/A and A/D converters in a single chip

Features

? A/D Converter Block

— Quadratic ?Σ modulation

— 16-bits resolution

— Built-in aliasing noise prevention digital filter

— A/D converters for two channels built in (synchronized input when standard audio output is used)

— S/N = 80 dB, THD + N = 0.025 (typical, A compensation filter used)

— Digital output: MSB first, forward packed, bit clock rates of 32, 48, and 64 Fs

— External integrator used.

? D/A Converter Block

— 16× oversampling quadratic noise shaper + PWM

— 16-bits resolution

— D/A converters for two channels built in (synchronized output)

— S/N = 85 dB, THD + N = 0.03 (typical, A compensation filter used)

— Digital input: MSB first, backward packed, bit clock rates of 32, 48, and 64 Fs

— Digital oversampling filters are not built in.

? Built-in double-buffering serial I/O circuits. (These circuits support both standard audio I/O and I/O with arbitrary timing.)

? Sampling frequencies of 48, 44.1, and 32 kHz

? Master clock: 512 Fs (24.576 MHz when fs = 48 kHz) or 384 Fs

Notes: Only the A/D converters operate when 384 Fs is selected as the master clock. The D/A converters do not operate in this mode. Since the analog I/F and analog power supply pins are more susceptible to damage from static electricity than the other pins, extra care is required.

Analog I/F pins: DZOUTL, ADL2, ADLVSS, ADLVDD, ADL3, DZOUTR, ADR2, ADRVSS, ADRVDD, ADR3, DALVSS, PWML, DALVDD, DARVSS, PWMR, DARVDD

? Package: 30-pin MFP

? Power supply: 5 V, single voltage, CMOS