Overview

The LC895925 provides the following signal processing functions for CD-R drives: CD-ROM decoding/encoding (complete with ECC processing for the former), subcode decoding/encoding, CD encoding, ATIP decoding, CLV servo, and SCSI interface registers.

Features

? CD-ROM decoding/encoding complete with error

detection and error correction

? Subcode decoding/encoding complete with error

correction

? ATIP decoding and CRC checking for both encoding

and decoding

? CLV servo control using ATIP data during encoding

? CIRC code insertion and EFM modulation during

encoding

? Support for PCA random EFM output during encoding

? Support for CD-ReWritable (CD-RW) Write Strategy

signal output

? Access to buffer RAM from microcontroller via

LC895925

? Built-in SCSI interface

? Speeds of 12× for decoding and 4× for encoding

— Frequencies

Decoding: 17.2872 MHz

Encoding: 17.2872 MHz without Write Strategy

support

69.1488 MHz with Write Strategy

support

? Transfers speeds of 10 megabytes/s (synchronous) and 5

megabytes/s (asynchronous) with 16 80-ns DRAMs *1

? Buffer RAM sizes between 1 and 32 megabits (using 16-

bit DRAMs)

? User control over sizes of CD main channel, C2 flag,

and subcode areas in buffer RAM

? Built-in batch transfer function for transferring entire

CD main channel, C2 flag, or subcode area in a single

operation

? Built-in multiblock transfer function for transferring multiple blocks in a single operation

Notes:

1. Using a SCSI master clock of 20 MHz with speeds up to 8×.

2. Using a SCSI master clock of 17.2872 MHz with speeds up to 4×.