LD1085CDT-R集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

LD1085CDT-R屬于集成電路（IC）的線性+開關穩壓器。由意法半導體集團制造生產的LD1085CDT-R穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

Description

The LD1085C is a low drop voltage regulator able to provide up to 3 A of output current. Dropout is guaranteed at a maximum of 1.5 V at the maximum output current, decreasing at lower loads. The LD1085C is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance.

A 2.85 V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1085C quiescent current flows into the load, so increase efficiency. Only a 10 μF minimum capacitor is need for stability.

The device is supplied in DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ± 2 at 25 °C.

Features

■ Typical dropout 1.3 V (at 3 A)

■ Three terminal adjustable output voltage

■ Guaranteed output current up to 3 A

■ Output tolerance ± 2 at 25 °C and ± 3 in full temperature range

■ Internal power and thermal limit

■ Wide operating temperature range -40 °C to 125 °C

■ Package available: DPAK

■ Pinout compatibility with standard adjustable VREG