LED6001TR集成電路（IC）的LED驅動器規格書PDF中文資料

LED6001TR屬于集成電路（IC）的LED驅動器。由意法半導體集團制造生產的LED6001TRLED 驅動器器件屬于 LED 驅動器電源管理集成電路 (PMIC) 系列，可通過標稱固定電壓的電源為負載（通常為發光二極管）提供電流，并且電流可控。它與用于電壓調節的類似產品的主要區別在于，這類器件提供較低的反饋電壓（以提高系統能效），而且通?？蓪ζ骷ぷ鼽c進行外部控制，可在照明應用中用于實現調光功能。

Description

The LED6001 device is a LED driver that combines a boost controller and a high-side current sensing circuitry optimized for driving one string of high-brightness LEDs. The device is compatible with multiple topologies such as boost, SEPIC and floating load buck-boost. The brightness of the LEDs can be controlled through PWM dimming and analog dimming (10:1 ratio) by means of two independent pins. Enhanced PWM dimming can be obtained thanks to a MOSFET in series with the LED string and directly driven by a dedicated pin.

Features

? Switching controller section

– 5.5 V to 36 V input voltage range

– Very low shutdown current: ISHDN < 10 μA

– Internal +5 V LDO for gate driver supply

– Internal +3.3 V LDO for device supply

– Fixed frequency peak current mode control

– Adjustable (100 kHz to 1 MHz) switching frequency

– External synchronization for multi-device applications

– High performance external MOSFET driver

– Cycle-by-cycle external MOSFET OCP

– Fixed internal soft-start

– Programmable output OVP

– Boost, buck-boost and SEPIC topologies supported

– Thermal shutdown with autorestart

– Output short-circuit detection

? LED control section

– Up to 60 V output voltage

– Constant current control loop

– High-side output current sensing circuitry

– 30 to 300 mV differential sensing voltage

– ± 4 output current reference accuracy

– Output overcurrent protection

– Sensing resistor failure protection

– PWM dimming with auxiliary series switch

– Analog dimming

Applications

? Indoor and architectural LED lighting

? Emergency LED lighting

? Off-grid LED street lighting

? White goods

? Gaming/gambling machines