LEOLVDSRDPT-D中文資料意法半導體數據手冊PDF規格書

Features

? LVDS single driver and single receiver

? 400 Mbps (200 MHz)

? 3 V to 3.6 V operating power supply

? 4.8 V absolute maximum ratings

? Individual enable/disable function with high impedance

? Cold spare on all pins

? Fail-safe function

? RML < 1 and CVCM <0.1 guaranteed outgassing

? Nickel/palladium/gold-lead-finished (NiPdAu), whisker-free

? Gold wires

? 50 krad (Si) total ionizing dose

? SEL-free up to 62.5 MeV.cm2/mg

? Mass: 80 mg

? Compliant with ST-LEO-specification

Description

The LEOLVDSRD is a 3 V to 3.6 V power supply (4.8 V absolute maximum

ratings) low voltage differential signaling (LVDS) driver and receiver qualified for use

in aerospace environments. It operates over a controlled impedance of 100 ohm

transmission media that may be printed circuit board traces, back planes, or cables.

The circuit features an internal fail-safe function to ensure a known state in case of

an input short-circuit or floating input. All pins have cold spare buffers to ensure they

are in high impedance when VCC is tied to GND.

The LEOLVDSRD can operate over a large temperature range of -40 °C to +125 °C

and it is housed in plastic TSSOP-20, thin-shrink small outline package, 20 leads,

using gold-wires and nickel/palladium/golden-lead-finishing to prevent from whiskers.

The LEOLVDSRD is compliant with ST-LEO-specification, dedicated specification for

space-ready rad-hard plastic products. This AEC-Q100-based specification offers

a specific trade-off among footprint size savings, cost of ownership and quality

assurance together with radiation hardness and a large quantity capability.

Applications

? Low earth orbit (LEO) satellites, high speed interface systems