LM25185-Q1中文資料德州儀器數據手冊PDF規格書

1 Features

? AEC-Q100-qualified for automotive applications

– Device temperature grade 1: –40°C to 125°C

ambient temperature range

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? 4.5-V to 42-V wide input voltage range

? Extended power range from less than 1 W to more

than 50 W

? Robust PSR flyback design for reliable and rugged

applications

– Robust design with only a transformer crossing

the isolation barrier

– ±1.5 total output regulation accuracy

– Optional VOUT temperature compensation

– Input UVLO and thermal shutdown protection

– Hiccup-mode overcurrent fault protection

– 0.9-mm HV-LV pin spacing in 14-pin HTSSOP

package

– –40°C to +150°C junction temperature range

? Integration reduces design size and cost

– No optocoupler or transformer auxiliary winding

required for VOUT regulation

– 2-A peak sink and 1-A peak source high-current

power MOSFET gate driver

? High efficiency with best-in-class active IQ

– Quasi-resonant switching in boundary

conduction mode (BCM) at heavy load

– External VCC option for improved efficiency

– High light-load efficiency with lowest IQ (25-μA

typical with external VCC)

– Single and multiple output implementations

? Ultra-low conducted and radiated EMI signatures

– Soft switching avoids diode reverse recovery

– Designed for CISPR 25 EMI requirement

? Create a custom design using LM25185-Q1 with

WEBENCH? Power Designer

2 Applications

? Automotive HEV/EV powertrain systems

– On-board charger

– Traction inverters: IGBT and SiC gate drivers

? Sub-AM band automotive body electronics

– HVAC compressor

– Interior heater module

? Battery Management Systems (BMS)

? Generic isolated bias power rails for industrial and

telecom systems

? Generic IGBT, MOSFET, GaN and SiC gate drivers

3 Description

The LM25185-Q1 is a primary-side regulated (PSR)

flyback controller with high efficiency over a wide

input voltage range of 4.5 V to 42 V. The

isolated output voltage is sampled from the primaryside

flyback voltage, eliminating the need for an

optocoupler, voltage reference, or third winding from

the transformer for output voltage regulation.