LM5150QRUMTQ1集成電路（IC）的PMIC-穩(wěn)壓器-DCDC開關式控制器規(guī)格書PDF中文資料

1 Features

? AEC-Q100 qualified:

– Device temperature grade 1: –40°C to +125°C

ambient operating temperature range

– Device HBM ESD classification level 2

– Device CDM ESD classification level C4B

? Functional Safety-Capable

– Documentation available to aid functional safety

system design

? Wide VIN input range from 1.5 V to 42 V when

VOUT ≥ 5 V (65-V absolute maximum)

? Low shutdown current (IQ ≤ 5 μA)

? Low standby current (IQ ≤ 15 μA)

? Four programmable output voltage options and

two selectable configurations

– 6.8 V, 7.5 V, 8.5 V, or 10.5 V

– Start-stop or e-call configurations

? Adjustable switching frequency from 220 kHz to

2.3 MHz

? Automatic wake-up and standby mode transition

? Optional clock synchronization

? Boost status indicator

? 1.5-A peak MOSFET gate driver

? Adjustable cycle-by-cycle current limit

? Thermal shutdown

? 16-pin WQFN with wettable and non-wettable flank

options

? Create a custom design using the LM5150-Q1 with

the WEBENCH? Power Designer

2 Applications

? Automotive start-stop system

? Automotive emergency call system

? Battery-powered boost converters

3 Description

The LM5150-Q1 device is a wide input range

automatic boost controller. The device is suitable

for use as a pre-boost converter which maintains

the output voltage from a vehicle battery during

automotive cranking or from a back-up battery during

the loss of vehicle battery.

The LM5150-Q1 switching frequency is programmed

by a resistor from 220 kHz to 2.3 MHz. Fast switching

(≥ 2.2 MHz) minimizes AM band interference and

allows for a small solution size and fast transient

response.

The LM5150-Q1 operates in low IQ standby mode

when the input or output voltage is above the preset

standby thresholds and automatically wakes up when

the output voltage drops below the preset wake-up

threshold.

The device transients in and out of the low IQ standby

mode to extend battery life at light load. A single

resistor programs the target output regulation voltage

as well as the configuration. Additional features

include low shutdown current, boost status indicator,

adjustable cycle-by-cycle current limit, and thermal

shutdown.