LMK04832PAP/EM中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? VID#: V62/22612

– Total ionizing dose 30 krad (ELDRS-free)

– SEL immune >43 MeV × cm2/mg

– SEFI immune >43 MeV × cm2/mg

? Ambient temperature range: –55°C to 125°C

? Maximum clock output frequency: 3255 MHz

? Multi-mode: dual PLL, single PLL, and clock

distribution

? 6-GHz external VCO or distribution input

? Ultra-low noise, at 2500 MHz:

– 54-fs RMS jitter (12 kHz to 20 MHz)

– 64-fs RMS jitter (100 Hz to 20 MHz)

– –157.6-dBc/Hz noise floor

? Ultra-low noise, at 3200 MHz:

– 61-fs RMS jitter (12 kHz to 20 MHz)

– 67-fs RMS jitter (100 Hz to 100 MHz)

– –156.5-dBc/Hz noise floor

? PLL2

– PLL FOM of –230 dBc/Hz

– PLL 1/f of –128 dBc/Hz

– Phase detector rate up to 320 MHz

– Two integrated VCOs: 2440 to 2600 MHz

and 2945 to 3255 MHz

? Up to 14 differential device clocks

– CML, LVPECL, LCPECL, HSDS, LVDS, and

2xLVCMOS programmable outputs

? Up to 1 buffered VCXO/XO output

– LVPECL, LVDS, 2xLVCMOS programmable

? 1-1023 CLKOUT divider

? 1-8191 SYSREF divider

? 25-ps step analog delay for SYSREF clocks

? Digital delay and dynamic digital delay for device

clocks and SYSREF

? Holdover mode with PLL1

? 0-delay with PLL1 or PLL2

2 Applications

? Communications payloads

? Radar imaging payload

? Command and data handling

3 Description

The LMK04832-SEP is a high performance clock

conditioner with JEDEC JESD204B/C support for

space applications.

The 14 clock outputs from PLL2 can be configured

to drive seven JESD204B/C converters or other logic

devices using device and SYSREF clocks. SYSREF

can be provided using both DC and AC coupling.

Not limited to JESD204B/C applications, each of the

14 outputs can be individually configured as highperformance

outputs for traditional clocking systems.

This device can be configured for operation in dual

PLL, single PLL, or clock distribution modes with or

without SYSREF generation or reclocking. PLL2 may

operate with either internal or external VCO.

The high performance combined with features like the

ability to trade off between power and performance,

dual VCOs, dynamic digital delay, and holdover allows

to provide flexible high performance clocking trees.