LP2985集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

1 Features

? VIN range (new chip): 2.5 V to 16 V

? VOUT range (new chip): 1.2 V to 5.0 V (fixed, 100-

mV steps)

? VOUT accuracy:

– ±1 for A-grade legacy chip

– ±1.5 for standard-grade legacy chip

– ±0.5 for new chip only

? ±1 output accuracy over load, and temperature

for new chip

? Output current: Up to 150 mA

? Low IQ (new chip): 71 μA at ILOAD = 0 mA

? Low IQ (new chip): 750 μA at ILOAD = 150 mA

? Shutdown current:

– 0.01 μA (typ) for legacy chip

– 1.12 μA (typ) for new chip

? Low noise: 30 μVRMS with 10-nF bypass capacitor

? Output current limiting and thermal protection

? Stable with 2.2-μF ceramic capacitors

? High PSRR: 70 dB at 1 kHz, 40 dB at 1 MHz

? Operating junction temperature: –40°C to +125°C

? Package: 5-pin SOT-23 (DBV)

2 Applications

? Washer and dryer

? Land mobile radio

? Active antenna system mMIMO

? Cordless power tool

? Motor drives and control boards

3 Description

The LP2985 is a fixed-output, wide-input, low-noise,

low-dropout voltage regulator supporting an input

voltage range from 2.5 V to 16 V and up to 150 mA of

load current. The LP2985 supports an output range of

1.2 V to 5.0 V (for new chip).

Additionally, the LP2985 (new chip) has a 1 output

accuracy across load, and temperature that can meet

the needs of low-voltage microcontrollers (MCUs) and

processors.

Low output noise of 30 μVRMS (with 10-nF bypass

capacitors) and wide bandwidth PSRR performance

of greater than 70 dB at 1 kHz and 40 dB at 1 MHz

help attenuate the switching frequency of an upstream

DC/DC converter and minimize post regulator filtering.

The internal soft-start time and current limit protection

reduce inrush current during start up, thus minimizing

input capacitance. Standard protection features, such

as overcurrent and overtemperature protection, are

included.

The LP2985 is available in a 5-pin 2.9-mm × 1.6-mm

SOT-23 (DBV) package.