LT8610集成電路（IC）的穩壓器-DC-DC開關穩壓器規格書PDF中文資料

LT8610屬于集成電路（IC）的穩壓器-DC-DC開關穩壓器。由亞德諾半導體技術有限公司制造生產的LT8610穩壓器 - DC-DC 開關穩壓器DC-DC 開關穩壓器 PMIC（電源管理集成電路）產品族中的產品是元器件級設備，用于需要穩定 DC 輸入電壓和/或?qū)⑵滢D(zhuǎn)換為不同幅度的輸出電壓的應用。這些器件與稱為“控制器”PMIC 的類似產品的區別在于集成了主開關元件，設備提供的電力會通過該元件。

DESCRIPTION

The LT?8609S is a compact, high efficiency, high speed

synchronous monolithic step-down switching regulator

that consumes only 1.7μA of non-switching quiescent

current. The LT8609S can deliver 2A of continuous current

with peak loads of 3A (<1sec) to support applications

such as GSM transceivers which require high transient

loads. Top and bottom power switches are included with

all necessary circuitry to minimize the need for external

components. Low ripple Burst Mode operation enables

high efficiency down to very low output currents while

keeping the output ripple below 10mVP-P. A SYNC pin

allows synchronization to an external clock, or spread

spectrum modulation of switching frequencies for low

EMI operation. Internal compensation with peak current

mode topology allows the use of small inductors and

results in fast transient response and good loop stability.

The EN/UV pin has an accurate 1V threshold and can be

used to program VIN undervoltage lockout or to shut down

the LT8609S reducing the input supply current to 1μA. A

capacitor on the TR/SS pin programs the output voltage

ramp rate during start-up while the PG flag signals when

VOUT is within ±8.5 of the programmed output voltage

as well as fault conditions. The LT8609S is available in a

small 16-lead 3mm × 3mm LQFN package.

FEATURES

n Silent Switcher? 2 Architecture

n Ultralow EMI Emissions on Any PCB

n Eliminates PCB Layout Sensitivity

n Internal Bypass Capacitors Reduce Radiated EMI

n Optional Spread Spectrum Modulation

n Wide Input Voltage Range: 3.0V to 42V

n Ultralow Quiescent Current Burst Mode? Operation:

n <2.5μA IQ Regulating 12VIN to 3.3VOUT

n Output Ripple <10mVP-P

n High Efficiency 2MHz Synchronous Operation:

n >93 Efficiency at 1A, 12VIN to 5VOUT

n 2A Maximum Continuous Output, 3A Peak Transient Output

n Fast Minimum Switch-On Time: 45ns

n Adjustable and Synchronizable: 200kHz to 2.2MHz

n Allows Use of Small Inductors

n Low Dropout

n Peak Current Mode Operation

n Internal Compensation

n Output Soft-Start and Tracking

n Small 16-Lead 3mm × 3mm LQFN Package

n AEC-Q100 Qualified for Automotive Applications

APPLICATIONS

n General Purpose Step Down

n Low EMI Step Down