LTC2862ACDD-1#PBF集成電路（IC）的驅動器接收器收發器規格書PDF中文資料

LTC2862ACDD-1#PBF屬于集成電路（IC）的驅動器接收器收發器。由亞德諾半導體技術有限公司制造生產的LTC2862ACDD-1#PBF驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。

DESCRIPTION

TheLTC?2862Ais a low power,20Mbpsor250kbpsRS485/RS422 transceiver operating on 3V to 5.5V supplies with ±60V overvoltage fault protection on the interface pins during all modes of operation, including power-down. Improvements were made to the LTC2862 for greater robustness and signal integrity: ±40kV HBM and Level 4 IEC ESD protection on the interface pins; increased resistance to electrical overstress;increased receiver noise immunity; additional receiver noise filtering on the LTC2862A-2; and an improved failsafe function optimized for high speed in the LTC2862A-1 and noise rejection in the LTC2862A-2. Low EMI slew rate limited data transmission is available in the250kbps LTC2862A-2 option, while theLTC2862A-1 operates to 20Mbps.

FEATURES

■ Protected from Overvoltage Line Faults to ±60V

■ 3V to 5.5V Supply Voltage

■ 20Mbps or Low EMI 250kbps Data Rate

■ ±40kV HBM ESD Interface Pins, ±15kV Other Pins

■ Enhanced Receiver and Failsafe Noise Immunity

■ IEC Level 4 ESD and EFT on Interface Pins

■ Extended Common Mode Range: ±25V

■ Guaranteed Failsafe Receiver Operation

■ High Input Impedance Supports 224 Nodes

■ MP-Grade Option Available (–55°C to 125°C)

■ Fully Balanced Differential Receiver Thresholds for

Low Duty Cycle Distortion

■ Current Limited Drivers and Thermal Shutdown

■ Compliant with TIA/EIA-485-A

■ Pin Compatible with LTC2862 and LT?1785

■ Available in DFN and Leaded Packages

APPLICATIONS

■ Supervisory Control and Data Acquisition (SCADA)

■ Industrial Control and Instrumentation Networks

■ Automotive and Transportation Electronics

■ Building Automation, Security Systems and HVAC

■ Medical Equipment

■ Lighting and Sound System Control