首頁>M29F400BB-55N6T>規格書詳情
M29F400BB-55N6T中文資料意法半導體數據手冊PDF規格書
廠商型號 |
M29F400BB-55N6T |
功能描述 | 4 Mbit 512Kb x8 or 256Kb x16, Boot Block Single Supply Flash Memory |
文件大小 |
208.64 Kbytes |
頁面數量 |
22 頁 |
生產廠商 | STMicroelectronics |
企業簡稱 |
STMICROELECTRONICS【意法半導體】 |
中文名稱 | 意法半導體集團官網 |
原廠標識 | |
數據手冊 | |
更新時間 | 2025-1-16 17:25:00 |
M29F400BB-55N6T規格書詳情
Description
The M29F400B is a 4 Mbit (512 Kb x8 or 256 Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M29F400B is fully backward compatible with the M29F400.
The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. Each block can be protected independently to prevent accidental Program or Erase commands from modifying the memory. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller simplifies the process of programming or erasing the memory by taking care of all of the special operations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards.
Features
■ Single 5 V ± 10 supply voltage for program, erase and read operations
■ Access time: 45 ns
■ Programming time
– 8 μs per Byte/Word typical
■ 11 memory blocks
– 1 Boot Block (Top or Bottom Location)
– 2 Parameter and 8 Main Blocks
■ Program/erase controller
– Embedded Byte/Word Program algorithm
– Embedded Multi-Block/Chip Erase algorithm
– Status Register Polling and Toggle Bits
– Ready/Busy Output Pin
■ Erase Suspend and Resume modes
– Read and Program another Block during Erase Suspend
■ Unlock Bypass Program command
– Faster Production/Batch Programming
■ Temporary block unprotection mode
■ Low power consumption
– Standby and Automatic Standby
■ 100,000 program/erase cycles per block
■ 20-year data retention
– Defectivity below 1 ppm/year
■ Electronic signature
– Manufacturer Code: 0020h
– Top Device Code M29F400BT: 00D5h
– Bottom Device Code M29F400BB: 00D6h
■ ECOPACK? packages available
供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
---|---|---|---|---|---|---|---|
Micron |
21+ |
48TSOP |
610880 |
本公司只售原裝 支持實單 |
詢價 | ||
Micron Technology Inc |
23+/24+ |
48-TFSOP |
8600 |
只供原裝進口公司現貨+可訂貨 |
詢價 | ||
STM |
20+ |
SSOP44 |
20500 |
汽車電子原裝主營-可開原型號增稅票 |
詢價 | ||
ST |
24+ |
SOP44W |
3629 |
原裝優勢!房間現貨!歡迎來電! |
詢價 | ||
STM |
2016+ |
SOP/44 |
6528 |
只做原廠原裝現貨!終端客戶個別型號可以免費送樣品! |
詢價 | ||
ST |
SOP44 |
68900 |
原包原標簽100%進口原裝常備現貨! |
詢價 | |||
STMicroelectronics |
2003 |
SOP44 |
30 |
原裝現貨海量庫存歡迎咨詢 |
詢價 | ||
24+ |
3000 |
公司存貨 |
詢價 | ||||
Micron |
21+ |
48TSOP |
13880 |
公司只售原裝,支持實單 |
詢價 | ||
ST/意法 |
23+ |
TSOP |
7695 |
一級代理原廠VIP渠道,專注軍工、汽車、醫療、工業、 |
詢價 |