首頁>M29F400BT-70M1>規格書詳情
M29F400BT-70M1中文資料意法半導體數據手冊PDF規格書
廠商型號 |
M29F400BT-70M1 |
功能描述 | 4 Mbit 512Kb x8 or 256Kb x16, Boot Block Single Supply Flash Memory |
文件大小 |
208.64 Kbytes |
頁面數量 |
22 頁 |
生產廠商 | STMicroelectronics |
企業簡稱 |
STMICROELECTRONICS【意法半導體】 |
中文名稱 | 意法半導體集團官網 |
原廠標識 | |
數據手冊 | |
更新時間 | 2024-12-28 8:00:00 |
M29F400BT-70M1規格書詳情
Description
The M29F400B is a 4 Mbit (512 Kb x8 or 256 Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M29F400B is fully backward compatible with the M29F400.
The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. Each block can be protected independently to prevent accidental Program or Erase commands from modifying the memory. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller simplifies the process of programming or erasing the memory by taking care of all of the special operations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards.
Features
■ Single 5 V ± 10 supply voltage for program, erase and read operations
■ Access time: 45 ns
■ Programming time
– 8 μs per Byte/Word typical
■ 11 memory blocks
– 1 Boot Block (Top or Bottom Location)
– 2 Parameter and 8 Main Blocks
■ Program/erase controller
– Embedded Byte/Word Program algorithm
– Embedded Multi-Block/Chip Erase algorithm
– Status Register Polling and Toggle Bits
– Ready/Busy Output Pin
■ Erase Suspend and Resume modes
– Read and Program another Block during Erase Suspend
■ Unlock Bypass Program command
– Faster Production/Batch Programming
■ Temporary block unprotection mode
■ Low power consumption
– Standby and Automatic Standby
■ 100,000 program/erase cycles per block
■ 20-year data retention
– Defectivity below 1 ppm/year
■ Electronic signature
– Manufacturer Code: 0020h
– Top Device Code M29F400BT: 00D5h
– Bottom Device Code M29F400BB: 00D6h
■ ECOPACK? packages available
供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
---|---|---|---|---|---|---|---|
ST |
21+ |
SOP44 |
8000 |
原裝現貨。假一賠十 |
詢價 | ||
ST |
16+ |
SOP |
25 |
原裝現貨假一罰十 |
詢價 | ||
ST |
20+ |
SOP44 |
35830 |
原裝優勢主營型號-可開原型號增稅票 |
詢價 | ||
ST/意法 |
23+ |
NA/ |
3271 |
原裝現貨,當天可交貨,原型號開票 |
詢價 | ||
ST |
14+ |
SOP-44 |
1033 |
一級代理,專注軍工、汽車、醫療、工業、新能源、電力 |
詢價 | ||
ST/意法 |
22+ |
SOP44 |
5623 |
只做原裝正品現貨!或訂貨假一賠十! |
詢價 | ||
ST |
原廠原封 |
93480 |
集團化配單-有更多數量-免費送樣-原包裝正品現貨-正規 |
詢價 | |||
STM |
2022 |
SOP-44 |
3200 |
全新原裝現貨 |
詢價 | ||
ST/意法 |
22+ |
SOP44 |
25000 |
只做原裝,一站式BOM配單,假一罰十 |
詢價 | ||
ST |
24+ |
SOP |
4500 |
原裝正品!公司現貨!歡迎來電! |
詢價 |