M30623E4中文資料瑞薩數(shù)據(jù)手冊PDF規(guī)格書

Description

The M16C/62 (80-pin version) group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 80-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications. The M16C/62 (80-pin version) group includes a wide range of products with different internal memory types and sizes and various package types.

Features

? Memory capacity..................................ROM (See Figure 1.1.4. ROM Expansion)

RAM 3K to 20K bytes

? Shortest instruction execution time ......62.5ns (f(XIN)=16MHZ, VCC=5V)

100ns (f(XIN)=10MHZ, VCC=3V, with software one-wait) : Mask ROM, flash memory 5V version

142.9ns (f(XIN)=7MHZ, VCC=3V, with software one-wait) : One-time PROM version

? Supply voltage .....................................4.2 to 5.5V (f(XIN)=16MHZ, without software wait) : Mask ROM, flash memory 5V version

4.5 to 5.5V (f(XIN)=16MHZ, without software wait) : One-time PROM version

2.7 to 5.5V (f(XIN)=10MHZ with software one-wait) : Mask ROM, flash memory 5V version

2.7 to 5.5V (f(XIN)=7MHZ with software one-wait) : One-time PROM version

? Low power consumption ......................25.5mW ( f(XIN)=10MHZ, with software one-wait, VCC = 3V)

? Interrupts..............................................25 internal and 5 external interrupt sources, 4 software

interrupt sources; 7 levels (including key input interrupt)

? Multifunction 16-bit timer......................5 output timers + 6 input timers (3 for timer function only)

? Serial I/O ..............................................5 channels (2 for UART or clock synchronous, 1 for UART, 2 for clock synchronous)

? DMAC ..................................................2 channels (trigger: 24 sources)

? A-D converter.......................................10 bits X 8 channels (Expandable up to 10 channels)

? D-A converter.......................................8 bits X 2 channels

? CRC calculation circuit.........................1 circuit

? Watchdog timer....................................1 line

? Programmable I/O ...............................70 lines

? Input port.. 1 line (P85 shared with NMI pin)

? Clock generating circuit .......................2 built-in clock generation circuits

(built-in feedback resistor, and external ceramic or quartz oscillator)

Note: Memory expansion mode and microprocessor mode are not supported.

Applications

Audio, cameras, office equipment, communications equipment, portable equipment