M306N0MCT中文資料三菱電機(jī)數(shù)據(jù)手冊PDF規(guī)格書

Description

The M16C/6NT group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 100-pin plastic molded QFP. These single chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications. Being equipped with two CAN (Controller Area Network) modules, the microcomputer is suited to drive automotive and industrial control systems. The CAN modules comply with the 2.0B specification.

Features

? Memory capacity ................................. ROM 128K/256K bytes

RAM 5K/10K bytes

? Shortest instruction execution time...... 62.5 ns (f(XIN) = 16MHz, 1/1 prescaler, without software wait)

100 ns (f(XIN) = 20MHz, 1/2 prescaler, without software wait)

? Supply voltage..................................... 4.2 to 5.5V (f(XIN) = 16MHz, 1/1 prescaler, without software wait)

4.2 to 5.5V (f(XIN) = 20MHz, 1/2 prescaler, without software wait)

? Low power consumption ...................... TBD (f(XIN) = 16MHz, 1/1 prescaler, without software wait)

TBD (f(XIN) = 20MHz, 1/2 prescaler, without software wait)

? Interrupts ............................................. 29 internal and 9 external interrupt sources, 4 software

interrupt sources; 7 priority levels (including key input interrupt)

? Multifunction 16-bit timer ..................... 5 output timers + 6 input timers

? Serial I/O ............................................. 4 channels (3 for UART or clock synchronous, 1 for clock synchronous)

? DMAC ................................................. 2 channels (trigger: 23 sources)

? CAN module ........................................ 2 channels, 2.0B active

? A-D converter ...................................... 10 bits X 26 analog inputs

? D-A converter ...................................... 8 bits X 2 analog outputs

? CRC calculation circuit ........................ 1 circuit

? Watchdog timer ................................... 1 15-bit timer

? Programmable I/O ............................... 87 lines

? Input port ............................................. 1 line (P85 shared with NMI pin)

? Chip select output................................ 4 lines

? Memory expansion .............................. Available (to a maximum of 1M bytes)

? Clock generating circuit ....................... 2 built-in clock generation circuits

(built-in feedback resistor, and external ceramic or quartz oscillator)

Applications

Automotive and industrial control systems