M41ST84WMQ集成電路（IC）的實時時鐘規格書PDF中文資料

M41ST84WMQ屬于集成電路（IC）的實時時鐘。由意法半導體集團制造生產的M41ST84WMQ實時時鐘實時時鐘 (RTC) 為幾乎所有需要保持精確時間的電子設備提供時間和/或日期信息。時鐘類型有二進制計數器、時鐘/日歷/監控器、歷時計時器、幻時鐘芯片、便攜式系統控制器、溫度記錄器、時間事件記錄器和計時器時鐘外設。其包含 2 B 至 2 MB 不等的存儲器，接口選項有 I2C、并行、串行、SPI、1 線式、2 線式、3 線式和 4 線式。

SUMMARY DESCRIPTION

The M41ST84Y/W Serial supervisory TIMEKEEPER? SRAM is a low power 512-bit static CMOS SRAM organized as 64 words by 8 bits. A built-in 32.768 kHz oscillator (external crystal controlled) and 8 bytes of the SRAM (see Table 9, page 16) are used for the clock/calendar function and are configured in binary coded decimal (BCD) format.

An additional 12 bytes of RAM provide status/control of Alarm, Watchdog and Square Wave functions. Addresses and data are transferred serially via a two line, bi-directional I2C interface. The built-in address register is incremented automatically after each WRITE or READ data byte.

The M41ST84Y/W has a built-in power sense circuit which detects power failures and automatical ly switches to the battery supply when a power failure occurs. The energy needed to sustain the SRAM and clock operations can be supplied by a small lithium button-cell supply when a power failure occurs. Functions available to the user include a non-volatile, time-of-day clock/calendar, Alarm interrupts, Watchdog Timer and programmable Square Wave output. Other features include a Power-On Reset as well as an additional input (RSTIN) which can also generate an output Reset (RST). The eight clock address locations contain the century, year, month, date, day, hour, minute, second and tenths/hundredths of a second in 24 hour BCD format. Corrections for 28, 29 (leap year - valid until year 2100), 30 and 31 day months are made automatically.

FEATURES SUMMARY

■ 5.0 OR 3.0V OPERATING VOLTAGE

■ SERIAL INTERFACE SUPPORTS I2C BUS (400 KHz)

■ OPTIMIZED FOR MINIMAL INTERCONNECT TO MCU

■ 2.5 TO 5.5V OSCILLATOR OPERATING VOLTAGE

■ AUTOMATIC SWITCH-OVER and DESELECT CIRCUITRY

■ CHOICE OF POWER-FAIL DESELECT VOLTAGES:

– M41ST84Y:

VCC = 4.5 to 5.5V;

4.20V ≤ VPFD ≤ 4.50V

– M41ST84W:

VCC = 2.7 to 3.6V;

2.55V ≤ VPFD ≤ 2.70V

■ 1.25V REFERENCE (for PFI/PFO)

■ COUNTERS FOR TENTHS/HUNDREDTHS OF SECONDS, SECONDS, MINUTES, HOURS, DAY, DATE, MONTH, YEAR, and CENTURY

■ 44 BYTES OF GENERAL PURPOSE RAM

■ PROGRAMMABLE ALARM and INTERRUPT FUNCTION (VALID EVEN DURING BATTERY BACK-UP MODE)

■ WATCHDOG TIMER

■ MICROPROCESSOR POWER-ON RESET

■ BATTERY LOW FLAG

■ ULTRA-LOW BATTERY SUPPLY CURRENT OF 500 nA (max)

■ OPTIONAL PACKAGING INCLUDES A 28-LEAD SOIC and SNAPHAT? TOP (to be ordered separately)

■ SNAPHAT PACKAGE PROVIDES DIRECT CONNECTION FOR A SNAPHAT TOP, WHICH CONTAINS THE BATTERY and CRYSTAL