MAX1362LEUB集成電路（IC）的ADC/DAC-特殊用途規(guī)格書PDF中文資料

General Description

The MAX1361/MAX1362 low-power, 10-bit, 4-channel, analog-to-digital converters (ADCs) feature a digitally programmable window comparator with an interrupt output for automatic system-monitoring applications. Once configured, monitor mode automatically asserts an interrupt when any analog input exceeds the programmed upper or lower thresholds, without interaction to the host. The MAX1361/MAX1362 respond to the SMBus? alert, allowing quick identification of the alarming device on a shared interrupt. A programmable delay between monitoring intervals lowers power consumption at reduced monitoring rates.

In addition, the MAX1361/MAX1362 integrate an internal voltage reference, a clock, and a 1.7MHz, high-speed, I2C*-compatible, 2-wire, serial interface. The optimized interface allows a maximum conversion rate of 94.4ksps in normal mode while reading back the conversion results. Each of the four analog inputs is configurable for single-ended or fully differential operation and unipolar or bipolar operation. Two scan modes utilize on-chip random access memory (RAM) to allow eight conversions of a selected channel or scanning of a group of channels to reduce interface overhead.

These devices operate from a single 2.7V to 3.6V (MAX1361) or 4.5V to 5.5V (MAX1362) supply and require only 436μA at the maximum sampling rate of 150ksps in monitor mode and 670μA at the maximum sampling rate of 94.4ksps. AutoShutdown? powers down the devices between conversions, reducing supply current to less than 0.5μA when idle.

The full-scale analog-input range is determined by the internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX1361 features a 2.048V internal reference, and the MAX1362 features a 4.096V internal reference.

The MAX1361/MAX1362 are available in a 10-pin μMAX? package and are specified over the extended (-40°C to +85°C) temperature range. For 12-bit applications, refer to the pin-compatible MAX1363/MAX1364 data sheet.

Features

? Monitor Mode

?? Programmable Lower/Upper Trip Threshold

?? Alarm-Status Register Records Fault Events

?? SMBus Alert Response

?? Programmable Sampling Intervals

? 10-Bit I2C-Compatible ADC ±1 LSB INL, ±1 LSB DNL

? 4-Channel Single-Ended or 2-Channel Fully Differential Inputs

? Software Programmable Bipolar/Unipolar Conversions

? Fast Sampling Rate

?? 94.4ksps While Continuously Reading

?? Conversions

?? 150ksps in Monitor Mode

? High-Speed I2C-Compatible Serial Interface

?? 100kHz/400kHz Standard/Fast Mode

?? Up to 1.7MHz High-Speed Mode

?? 6 Available I2C Slave Addresses

? Single Supply

?? 2.7V to 3.6V (MAX1361)

?? 4.5V to 5.5V (MAX1362)

? Internal Reference

?? 2.048V (MAX1361)

?? 4.096V (MAX1362)

? External Reference: 1V to VDD

? Low Power

?? 436μA in Monitor Mode (150ksps)

?? 670μA at 94.4ksps

?? 6μA at 1ksps

?? 0.5μA in Power-Down Mode

? Small Package

?? 10-Pin μMAX

Applications

?? System Monitoring/Supervision

?? Servers/Workstations

?? High Reliability Power Supplies

?? Medical Instrumentation