MAXQ3108-FFN+中文資料美信數(shù)據(jù)手冊(cè)PDF規(guī)格書

General Description

The MAXQ3108 is a low-power microcontroller that features two high-performance MAXQ20 cores: a dedicated core (DSPCore) for intensive data processing and a user core (UserCore) for supervisory functions. The two cores can operate at different clock speeds, allowing lower system power consumption for even processing intensive applications. The UserCore can be configured to run at the lowest clock rate possible for monitoring the peripherals for communication activities, while the DSPCore runs at the highest speed.

Features

? High-Performance, Low-Power, Dual 16-Bit RISC Cores

? Approaches 1MIPS per MHz

? System Clock

??? 10.027MHz (DSPCore)

??? 5.014MHz (UserCore)

? 33 Instructions

? Approximately 100ns Execution Time at 10.027MHz

? Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement

? 16-Bit Instruction Word, 16-Bit Data Bus

? 16 x 16-Bit General-Purpose Working Registers for Each Core

? 16-Level Hardware Stack for Each Core

? Hardware Support for Software Stack

? Memory Features

??? UserCore

??????? 64KB Flash Program Memory

??????? 16B Battery-Backed (VBAT) Data SRAM

??????? 4KB Utility ROM

??????? 2KB Data SRAM; 10KB Total Data SRAM (If DSPCore Inactive)

??? DSPCore

??????? 8KB User-Loadable SRAM Code Memory

??????? 1KB Data SRAM

? Peripherals

??? FLL (10MHz Output with 32kHz Input)

??? SPI Master, I2C Master

??? Two UART Channels (One Supports IR Carrier Modulation)

??? Math Accelerator for Each Core

??? Three Manchester Decoder and Cubic Sinc Filter Channels for Interfacing to DS8102 Delta-Sigma Modulators

??? Two 16-Bit Programmable Timer/Counters

??? RTC with Alarms and Digital Trim, Dedicated Battery-Backup Pin (VBAT)

??? Two Programmable Pulse Generators

??? Independent Watchdog Timer for Each Core

??? External Interrupts

??? JTAG Interface

? Operating Modes

??? Stop Mode: 0.1μA typ

??? Active Current at 10MHz and VDD = 2.0V: 1.0mA typ