首頁>MBM29DL400TC-55>規格書詳情
MBM29DL400TC-55中文資料富士通數據手冊PDF規格書
相關芯片規格書
更多MBM29DL400TC-55規格書詳情
GENERAL DESCRIPTION
The MBM29DL400TC/BC are a 4M-bit, 3.0 V-only Flash memory organized as 512K bytes of 8 bits each or 256K words of 16 bits each. The MBM29DL400TC/BC are offered in a 48-pin TSOP(I) package. These devices are designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The devices can also be reprogrammed in standard EPROM programmers.
FEATURES
? Single 3.0 V read, program, and erase
Minimizes system level power requirements
? Simultaneous operations
Read-while-Erase or Read-while-Program
? Compatible with JEDEC-standard commands
Uses same software commands as E2PROMs
? Compatible with JEDEC-standard world-wide pinouts (Pin compatible with MBM29LV400TC/BC)
48-pin TSOP(I) (Package suffix: PFTN – Normal Bend Type, PFTR – Reversed Bend Type)
? Minimum 100,000 program/erase cycles
? High performance
55 ns maximum access time
? Sector erase architecture
Two 16K byte, four 8K bytes, two 32K byte, and six 64K bytes.
Any combination of sectors can be concurrently erased. Also supports full chip erase.
? Boot Code Sector Architecture
T = Top sector
B = Bottom sector
? Embedded EraseTM Algorithms
Automatically pre-programs and erases the chip or any sector
? Embedded ProgramTM Algorithms
Automatically writes and verifies data at specified address
? Data Polling and Toggle Bit feature for detection of program or erase cycle completion
? Ready/Busy output (RY/BY)
Hardware method for detection of program or erase cycle completion
? Automatic sleep mode
When addresses remain stable, automatically switch themselves to low power mode.
? Low VCC write inhibit ≤ 2.5 V
? Erase Suspend/Resume
Suspends the erase operation to allow a read in another sector within the same device
? Sector protection
Hardware method disables any combination of sectors from program or erase operations
? Sector Protection Set function by Extended sector protection command
? Fast Programming Function by Extended Command
? Temporary sector unprotection
Temporary sector unprotection via the RESET pin.
產品屬性
- 型號：
MBM29DL400TC-55
- 制造商：
FUJITSU
- 制造商全稱：
Fujitsu Component Limited.
- 功能描述：
4M(512K X 8/256K X 16) BIT
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
FUJI |
0541+ |
TSSOP |
1200 |
一級代理,專注軍工、汽車、醫療、工業、新能源、電力 |
詢價 | ||
FUJITSU/富士通 |
23+ |
TSSOP |
13000 |
原廠授權一級代理,專業海外優勢訂貨,價格優勢、品種 |
詢價 | ||
FUJI/富士電機 |
2021+ |
TSSOP |
100500 |
一級代理專營品牌!原裝正品,優勢現貨,長期排單到貨 |
詢價 | ||
FUJITSU/富士通 |
23+ |
TSOP48 |
50000 |
全新原裝正品現貨,支持訂貨 |
詢價 | ||
FUJLTSU |
24+ |
TSOP |
960 |
進口原裝正品現貨 |
詢價 | ||
FUJITSU/富士通 |
22+ |
TSSOP |
14008 |
原裝正品 |
詢價 | ||
FUJI |
TSSOP |
699839 |
集團化配單-有更多數量-免費送樣-原包裝正品現貨-正規 |
詢價 | |||
FUJITSU/富士通 |
23+ |
NA/ |
95 |
優勢代理渠道,原裝正品,可全系列訂貨開增值稅票 |
詢價 | ||
FUJITSU |
TSOP48 |
53650 |
一級代理 原裝正品假一罰十價格優勢長期供貨 |
詢價 | |||
FUJITSU |
20+ |
TSOP |
2960 |
誠信交易大量庫存現貨 |
詢價 |
