The Local Interconnect Network (LIN) is a serial communication

protocol, designed to support automotive networks in conjunction with

a Controller Area Network (CAN). As the lowest level of a hierarchical

network, LIN enables cost-effective communication with sensors and

actuators when all the features of CAN are not required.

The three 33662 versions are designed to operate at different

maximum baud rates. The 33662LEF and 33662BLEF, and the

33662SEF and 33662BSEF, offer a normal baud rate (20 kbps), and

the 33662JEF and 33662BJEF, a slow baud rate (10 kbps). They

integrate a fast baud rate (above 100 kbps), as reported by the RXD pin

for test and programming modes. They provide excellent EMC

(Electromagnetic Compatibility) and Radiated Emission performance,

ESD (Electrostatic Discharge) robustness, and safe behavior, in the

event of a LIN bus short-to-ground, or a LIN bus leakage during lowpower

mode. This device is powered by SMARTMOS technology.

Features

?Operational from a VSUP of 7.0 to 18 V DC, functional up to 27 V DC, and handles 40 V during Load Dump

?Compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602and ISO 17987-4:2016 (12 V)Active bus wave shaping, offering excellent radiated emissionperformance

?Sustains up to 15.0 kV minimum ESD IEC61000-4-2 on the LIN Bus, 20 kV on the WAKE pin, and 25 kV on the VSUP pin

?Very high immunity against electromagnetic interference

?Low standby current in Sleep mode

?Overtemperature protection

?Local and remote Wake-up capability reported by the RXD pin

?Fast baud rate selection reported by RXD pin

?5.0 V and 3.3 V compatible digital inputs without any requiredexternal components

?Pin-to-pin compatible with TJA1021

Applications

?Automotive Market:

?Body electronics (BCM, gateway, roof, door,lighting, HVAC)

?Powertrain (EMS, start & stop), BMS

?Safety & Chassis (TPMS, seat belt)

MC33662SEF屬于集成電路（IC） > 驅動器，接收器，收發器。恩智浦半導體公司制造生產的MC33662SEF驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。