MC33GD3100A3EK集成電路（IC）的柵極驅動器規(guī)格書PDF中文資料

description

The MC33GD3100 is an advanced single channel gate driver for IGBTs and SiC power

devices. Integrated Galvanic isolation and low on-resistance drive transistors provide

high charging and discharging current, low dynamic saturation voltage and rail-to-rail

gate voltage control.

Current and temperature sense minimizes IGBT stress during faults. Accurate and

configurable under voltage lockout (UVLO) provides protection while ensuring sufficient

gate drive voltage headroom.

The MC33GD3100 autonomously manages severe faults and reports faults and status

via INTB pin and an SPI interface. It is capable of directly driving gates of most IGBTs

and SiC MOSFETs. Self test, control and protection functions are included for design

of high reliability systems (ASIL C/D). It meets the stringent requirements of automotive

applications and is fully AEC-Q100 grade 1 qualified.

Features and benefits

This section summarizes the key features, safety features, and regulatory approvals.

Key features

? SPI interface for safety monitoring, programmability and flexibility

? Low propagation delay and minimal PWM distortion

? Integrated Galvanic signal isolation (up to 8 kV)

? Integrated gate drive power stage capable of 15 A peak source and sink

? Fully programmable Active Miller Clamp

? Compatible with negative gate supply

? Compatible with current sense and temperature sense IGBTs

? Integrated soft shutdown, two-level turn-off, active clamp, and segmented drive for

wave shaping

? CMTI > 100 V/ns

? Compatible with 200 V to 1700 V IGBT/SiC, power range > 125 kW

? Operating temperature range ?40 °C to 125 °C

? External Creepage distance (CPG): > 7.8 mm

? Operating frequency > 40 kHz

? 5.0 V and 3.3 V tolerant MCU interface available

Safety features

? Certified to ASIL D ISO26262 functional safety requirements for full diagnostics

? Current, DESAT, and temperature sense inputs and ADC reporting for IGBT/SiC

monitoring

? Fast short-circuit protection, overcurrent protection, temperature warning and shutdown

? Interrupt pin for fast response to faults

? Built-in self-check of all analog and digital circuits

? Continuous watchdog of die-to-die communications

? Mandatory deadtime enforcement

? Over and undervoltage supervision of all power supplies on both low and high voltage

sides

? Fail-safe state management pins on both low and high voltage sides

? VGE real time cycle-by-cycle monitoring

Safety and regulatory approvals

? Reinforced Isolation per DIN V VDE V 0884-10

? Withstand 2500 V rms (1 minute) isolation per UL 1577

? CSA Component Acceptance Notice 5A

? AEC-Q100 grade 1 automotive qualified