Features

? 16-bit CPU12

— Upward compatible with M68HC11 instruction set

— Interrupt stacking and programmer’s model identical to M68HC11

— HCS12 Instruction queue

— Enhanced indexed addressing

? Multiplexed bus

— Single chip or expanded

— 16 address/16 data wide or 16 address/8 data narrow modes

— External address space 1MByte for Data and Program space (112 pin package only)

? Wake-up interrupt inputs depending on the package option

— 8-bit port H

— 2-bit port J1:0

— 2-bit port J7:6 shared with IIC, CAN4 and CAN0 module

— 8-bit port P shared with PWM or SPI1,2

? Memory options

— 32K, 64K, 128K, 256K, 512K Byte Flash EEPROM

— 1K, 2K, 4K Byte EEPROM

— 2K, 4K, 8K, 12K, 14K Byte RAM

? Analog-to-Digital Converters

— One or two 8-channel modules with 10-bit resolution depending on the package option

— External conversion trigger capability

? Up to five 1M bit per second, CAN 2.0 A, B software compatible modules

— Five receive and three transmit buffers

— Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit or 8 x 8 bit

— Four separate interrupt channels for Receive, Transmit, Error and Wake-up

— Low-pass filter wake-up function in STOP mode

— Loop-back for self test operation

? Enhanced Capture Timer (ECT)

— 16-bit main counter with 7-bit prescaler

— 8 programmable input capture or output compare channels; 4 of the 8 input captures with buffer

— Input capture filters and buffers, three successive captures on four channels, or two captures on four

channels with a capture/compare selectable on the remaining four

— Four 8-bit or two 16-bit pulse accumulators

— 16-bit modulus down-counter with 4-bit prescaler

— Four user-selectable delay counters for signal filtering

? 8 PWM channels with programmable period and duty cycle (7 channels on 80 Pin Packages)

— 8-bit, 8-channel or 16-bit, 4-channel

— Separate control for each pulse width and duty cycle

— Center- or left-aligned outputs

— Programmable clock select logic with a wide range of frequencies

? Serial interfaces

— Two asynchronous serial communications interfaces (SCI)

— Up to three synchronous serial peripheral interfaces (SPI)

— IIC

? SAE J1850 Compatible Module (BDLC)

— 10.4 kbps Variable Pulse Width format

— Byte level receive and transmit

— 4x receive mode supported

? SIM (System Integration Module)

— CRG (windowed COP watchdog, real time interrupt, clock monitor, clock generation and reset)

— MEBI (multiplexed external bus interface)

— INT (interrupt control)

? Clock generation

— Phase-locked loop clock frequency multiplier

— Limp home mode in absence of external clock

— Clock Monitor

— Low power 0.5 to 16 MHz crystal oscillator reference clock

? Operating frequency for ambient temperatures TA -40°C <= TA <= 125°C

— 50MHz equivalent to 25MHz Bus Speed for single chip

40MHz equivalent to 20MHz Bus Speed in expanded bus modes.

? Internal 5V to 2.5V Regulator

? 112-Pin LQFP or 80-Pin QFP package

— I/O lines with 5V input and drive capability

— 5V A/D converter inputs and 5V I/O

— 2.5V logic supply

? Development support

— Single-wire background debug? mode (BDM)

— On-chip hardware breakpoints