MCA2101-65-5中文資料新納數(shù)據(jù)手冊PDF規(guī)格書

FEATURES

?

AEC-Q100 qualified

?

AMR based integrated current sensor

?

Superior Range & Accuracy

0.6% typical total error @25°C (MCA2101-20-5)

2.0% max error over temperature (MCA2101-20-5)

?

Superior Frequency Response

5.0 MHz (typical 3dB Magnitude BW)

1.3 MHz (typical 3dB Phase BW)

?

Fast output response time (80ns typical)

?

Low Primary Resistance (0.9 mΩ)

?

Single 5V Supply Operation

?

Low power consumption (6.5mA typical)

?

Zero-Current Reference Pin (Vref)

?

Overcurrent fault detection

?

SOIC-16 package (RoHS/REACH compliant)

?

-40 to +125°C Operating Temperature Range

?

UL/IEC/EN62368-1 Certified

4.8 kV Dielectric Strength Voltage

1118 VRMS Basic Isolation Voltage

557 VRMS Reinforced Isolation Voltage

APPLICATIONS

Server, Telecom, & Industrial PWR Supplies

Power Aggregation, Over-Current Protection

Dynamic Current Sensing in Feedback Loops

PFC and Inverter Control

Motor Control Loops & Protection

Automation, Robotics, Servo Systems

Automotive & EV Power Systems

Solar Inverters and Optimizers

Grid-Tie and Storage Current Monitoring

MPPT Circuit Current Monitoring

Central Inverter Current Monitoring

Consumer

Motor Balance and Remote Device Monitoring

Home Automation Control & IOT remote sensing

DESCRIPTION

The MCA2101 products are ±5A, ±20A, ±50A, ±65A fully integrated bi-directional analog output current sensors that deliver both high accuracy and high bandwidth. ACEINNA’s state-of-the-art Anisotropic Magneto Resistive (AMR) sensor technology provides inherently low noise, excellent linearity and repeatability.

A fully isolated current path is provided by a low resistance copper conductor integrated into the package making it suitable for both high-side and low side bi-directional current sensing. The high bandwidth of 5.0MHz (3dB) and low phase delay makes it ideal for current sense feedback loops in motor control, inverters, uninterruptible power supplies, battery management, power factor correction, high voltage distribution bus converters and power supply applications, including those with fast switching wide-bandgap SiC and GaN based power stages.

These devices are factory-calibrated to achieve low offset error and provide a precise analog voltage output that is linearly proportional to the conduction current (AC or DC) with sensitivity (mV/A) compatible with A/D converters and analog control loops in power systems. The AMR sensor device structure is designed to eliminate sensitivity to stray and common mode magnetic fields.

Due to the inherently low output noise of ACEINNA’s sensor technology, additional filtering is not required to reduce noise that reduces accuracy at low-level currents in systems with dynamic load profiles.

The MCA2101 products in SOIC-16 package are simple to use with no or minimal external components (other than decoupling capacitor) enabling fast design, supports high isolation and are UL/IEC/EN62368-1 certified.