MCP16301H集成電路（IC）的穩壓器-DC-DC開關穩壓器規格書PDF中文資料

MCP16301H屬于集成電路（IC）的穩壓器-DC-DC開關穩壓器。由微芯科技股份有限公司制造生產的MCP16301H穩壓器 - DC-DC 開關穩壓器DC-DC 開關穩壓器 PMIC（電源管理集成電路）產品族中的產品是元器件級設備，用于需要穩定 DC 輸入電壓和/或?qū)⑵滢D(zhuǎn)換為不同幅度的輸出電壓的應用。這些器件與稱為“控制器”PMIC 的類似產品的區別在于集成了主開關元件，設備提供的電力會通過該元件。

General Description

The MCP16301/H devices are highly integrated,

high-efficiency, fixed-frequency, step-down DC-DC

converters in a popular 6-pin SOT-23 package, that

operate from input voltage sources up to 36V.

Integrated features include a high-side switch,

fixed-frequency peak current mode control, internal

compensation, peak current limit and overtemperature

protection. Only a few external components are

necessary to develop a complete step-down DC-DC

converter power supply.

High converter efficiency is achieved by integrating the

current-limited, low-resistance, high-speed N-Channel

MOSFET and associated drive circuitry. High

switching frequency minimizes the size of external

filtering components, resulting in a small solution size.

The MCP16301/H devices can supply 600 mA of

continuous current while regulating the output voltage

from 2.0V to 15V. An integrated, high-performance

peak current mode architecture keeps the output

voltage tightly regulated, even during input voltage

steps and output current transient conditions that are

common in power systems.

The EN input is used to turn the device on and off.

While turned off, only a few micro amps of current are

consumed from the input for power shedding and load

distribution applications.

Output voltage is set with an external resistor divider.

The MCP16301/H devices are offered in a

space-saving SOT-23-6 surface mount package.

Features

? Up to 96 Typical Efficiency

? Input Voltage Range:

- 4.0V to 30V (MCP16301)

- 4.7V to 36V (MCP16301H)

? Output Voltage Range: 2.0V to 15V

? 2 Output Voltage Accuracy

? Passes Automotive AEC-Q100 Reliability Testing

? Integrated N-Channel Buck Switch: 460 m?

? Minimum 600 mA Output Current Over All Input

Voltage Range (See Figure 2-6 for Maximum

Output Current vs. VIN):

- Up to 1A output current at 3.3V, 5V and 12V

VOUT, SOT-23 package at +25°C ambient

temperature

? 500 kHz Fixed Frequency

? Adjustable Output Voltage

? Low Device Shutdown Current

? Peak Current Mode Control

? Internal Soft-Start

? Internal Compensation

? Stable with Ceramic Capacitors

? Cycle-by-Cycle Peak Current Limit

? Undervoltage Lockout (UVLO): 3.5V

? Overtemperature Protection

? Available Package: SOT-23-6

Applications

? PIC? Microcontroller and dsPIC? Digital Signal

Controller Bias Supply

? 24V Industrial Input DC-DC Conversion

? Set-Top Boxes

? DSL Cable Modems

? Automotive

? Wall Cube Regulation

? SLA Battery-Powered Devices

? AC-DC Digital Control Power Source

? Power Meters

? D2 Package Linear Regulator Replacement

- See Figure 5-2

? Consumer

? Medical and Health Care

? Distributed Power Supplies