MCT8315ZR中文資料德州儀器數據手冊PDF規(guī)格書

1 Features

? Three-phase BLDC motor driver with integrated

Sensored Trapezoidal control

– Hall sensor based trapezoidal (120°)

commutation

– Supports analog or digital hall inputs

– Configurable PWM modulation: synchronous/

asynchronous

– Cycle-by-cycle current limit to limit phase

current

– Supports up to 200-kHz PWM frequency

– Active demagnetization to reduce power losses

? 4.5-V to 35-V operating voltage (40-V abs max)

? High output current capability: 4-A Peak

? Low MOSFET on-state resistance

– 275-mΩ (typ.) RDS(ON) (HS + LS) at TA = 25°C

? Low power sleep mode

– 2.5-μA (max.) at VVM = 24-V, TA = 25°C

? Integrated current limiting eliminates external

current sense resistors

? Flexible device configuration options

– MCT8315ZR: 5-MHz 16-bit SPI interface for

device configuration and fault status

– MCT8315ZH: Hardware pin based

configuration with buck

– MCT8315ZT: Hardware pin based configuration

without buck

? Supports 1.8-V, 3.3-V and 5-V logic inputs

? Built-in 3.3-V/5-V, 200-mA buck regulator

? Built-in 3.3-V, 30-mA LDO regulator

? Delay compensation reduces duty cycle distortion

? Suite of integrated protection features

– Supply undervoltage lockout (UVLO)

– Charge pump undervoltage (CPUV)

– Overcurrent protection (OCP)

– Motor lock protection

– Thermal warning and shutdown (OTW/TSD)

– Fault condition indication pin (nFAULT)

– Optional fault diagnostics over SPI interface

2 Applications

? Brushless-DC (BLDC) Motor Modules

? CPAP machines

? Printers

? Robotic vacuums

? Small home appliances

? Office automation machines

? Factory automation and robotics

3 Description

The MCT8315Z provides a single-chip, codefree

sensored trapezoidal solution for customers

driving 12-V/24-V brushless-DC motors; no external

microcontroller is needed to spin the BLDC motor.

The MCT8315Z integrates three ? -bridges with 40-

V absolute maximum capability and a low RDS(ON)

of 275 mΩ (HS+ LS) to enable high power drive

capability. The integrated current limiting feature

limits motor currents during start-up or high load

conditions while eliminating the need for external

sense resistors. MCT8315Z provides an output

voltage adjustable buck regulator and an LDO that

can be used to power external circuits. MCT8315Z

integrates three analog hall comparators for position

sensing to achieve sensored trapezoidal BLDC motor

control. The control scheme is highly configurable

through hardware pins or register settings ranging

from motor current limiting behavior to advance angle.

The speed can be controlled through a PWM input.

A number of protection features including supply

undervoltage lockout (UVLO), overvoltage protection

(OVP), charge pump undervoltage (CPUV),

overcurrent protection (OCP), over-temperature

warning (OTW) and over-temperature shutdown

(TSD) are integrated into MCT8315Z to protect the

device, motor, and system against fault events. Fault

conditions are indicated by the nFAULT pin.

Refer Application Information for design consideration

and recommendation on device usage.