MIC3000BML集成電路（IC）的驅(qū)動器接收器收發(fā)器規(guī)格書PDF中文資料

General Description

The MIC3000 enables the implementation of sophisticated, hot-pluggable fiber optic transceivers with intelligent laser control and Digital Diagnostic Monitoring Interface per SFF-8472. It essentially integrates all non-datapath functions of an SFP transceiver into a tiny 4mm x 4mm MLF? package. It also works well as a microcontroller peripheral in transponders or 10Gbps transceivers.

A highly configurable automatic power control (APC) circuit controls laser bias. Bias and modulation are temperature compensated using dual DACs, an on-chip temperature sensor, and NVRAM look-up tables. A programmable internal feedback resistor provides unprecedented dynamic range for APC. Controlled laser turn-on facilitates hot-plugging.

An analog-to-digital converter converts the measured temperature, voltage, bias current, transmit power, and received power from analog-to-digital. Each parameter is compared against user-programmed warning and alarm thresholds. Analog comparators and DACs provide high-speed monitoring of received power and critical laser operating parameters.

An interrupt output, power-on hour meter, and data-ready bits add user friendliness beyond SFF-8472. The interrupt output and data-ready bits reduce overhead in the host system. The power-on hour meter logs operating hours using an internal real-time clock and stores the result in NVRAM.

Communication with the MIC3000 is via an industry standard 2-wire serial interface. Nonvolatile memory is provided for serial ID, configuration, and separate OEM and user scratchpad spaces. Two-level password protection guards against data corruption.

Features

? APC or constant-current laser bias

? Supports multiple laser types and bias circuit topologies

? Drives external low-cost BJT for laser bias

? Integrated digital temperature sensor

? Temperature compensation of modulation, bias, and fault levels via NVRAM look-up tables

? Direct interface to SY88932, SY88982, SY89307 and other drivers

? NVRAM to support GBIC/SFP serial ID function

? User writable EEPROM scratchpad

? Diagnostic monitoring interface per SFF-8472

– Monitors and reports critical parameters: temperature, bias current, TX and RX optical power, and supply voltage

– S/W control and monitoring of TXFAULT, RXLOS, RATESELECT, and TXDISABLE

– External calibration

? Power-on hour meter

? Interrupt capability

? Extensive test and calibration features

? 2-wire I2C compatible serial interface

? SFP MSA and SFF-8472 compliant

? 3.0V to 3.6V power supply range

? 5V-tolerant I/O

? 4mm x 4mm 24-pin MLF? package

Applications

? SFF/SFP optical transceivers

? SONET/SDH transceivers and transponders

? Fibre channel transceivers

? 10Gbps transceivers

? Free space optical communications

? Proprietary optical links