MIC33M650集成電路（IC）的穩壓器-DC-DC開關穩壓器規格書PDF中文資料

MIC33M650屬于集成電路（IC）的穩壓器-DC-DC開關穩壓器。由微芯科技股份有限公司制造生產的MIC33M650穩壓器 - DC-DC 開關穩壓器DC-DC 開關穩壓器 PMIC（電源管理集成電路）產品族中的產品是元器件級設備，用于需要穩定 DC 輸入電壓和/或?qū)⑵滢D(zhuǎn)換為不同幅度的輸出電壓的應用。這些器件與稱為“控制器”PMIC 的類似產品的區別在于集成了主開關元件，設備提供的電力會通過該元件。

General Description

The MIC33M650 is a pin-selectable output voltage,

high-efficiency, low-voltage input, 6A current, synchronous

step-down regulator power module with integrated

inductor. The COT control architecture with HyperLight

Load? mode provides very high efficiency at light loads,

while still having an ultra-fast transient response.

The MIC33M650 output voltage is set by two VSEL

(Voltage Selection) pins, between nine different values.

This method eliminates the need for an external feedback

resistor divider and improves the output voltage

setting accuracy.

The 2.4V to 5.5V input voltage range, low shutdown and

quiescent currents make the MIC33M650 ideal for

single-cell Li-Ion battery-powered applications. The 100

duty cycle capability provides low dropout operation,

extending operating range in portable systems.

The MIC33M650 pinout is compatible with the

MIC33M656 I2C-based programmable regulator version,

such that applications can be easily converted. An

open-drain PG output is provided to indicate when the

output voltage is within 9 of regulation and facilitates

the interface with an MCU or power sequencing. If set

in shutdown (EN = GND), the MIC33M650 typically

draws 1.5 μA, while the output is discharged through

10pull-down.

The MIC33M650 is available in a thermally efficient,

53-Lead, 6 mm x 10 mm x 3 mm B1QFN package, with

an operating junction temperature range from -40°C to +125°C.

Features

? 2.4V to 5.5V Input Voltage Range

? 6A Output Current

? Pin Strapping Voltage Selection:

- Tri-state pins (nine voltage options)

- 0.6V, 0.8V, 0.9V, 1.0V, 1.2V, 1.5V, 1.8V, 2.5V

or 3.3V output voltage

? Reduced Component Count (No Feedback

Resistors)

? High Efficiency (up to 95)

? Output Discharge when Disabled

? Constant-On-Time (COT) Control with High

Switching Frequency:

- 1.2 MHz typical at 1.0V output voltage

? ±1.5 Output Voltage Accuracy Over

Line/Load/Temperature Range

? 0.8 ms/V Soft Start Speed

? Supports Safe Start-up with Pre-Biased Output

? Typical 1.5 μA Shutdown Supply Current

? Low Dropout Operation (100 Duty Cycle)

? Ultra-Fast Transient Response

? Latch-Off Thermal Shutdown Protection

? Latch-Off Current Limit Protection

? Power Good (PG) Open-Drain Output

? Meets CISPR32 Class B Emissions

? Package: 53-Lead, 6 mm x 10 mm B1QFN

Applications

? Solid-State Drives (SSD)

? FPGAs, DSP and Low-Voltage ASIC Power