General Description

The MIC4606 is an 85V full-bridge MOSFET driver that

features adaptive dead time and shoot-through protection.

The adaptive dead-time circuitry actively monitors

both sides of the full bridge to minimize the time

between high-side and low-side MOSFET transitions,

thus maximizing power efficiency. Anti-shoot-through

circuitry prevents erroneous inputs and noise from

turning both MOSFETs of each side of the bridge on at

the same time.

The MIC4606 also offers a wide 5.5V to 16V operating

supply range to maximize system efficiency. The low

5.5V operating voltage allows longer run times in

battery-powered applications. Additionally, the MIC4606

device’s adjustable gate drive sets the gate drive voltage

to VDD for optimal MOSFET RDS(ON), which minimizes

power loss due to the MOSFET’s RDS(ON).

The MIC4606-1 features four independent inputs while

the MIC4606-2 utilizes two PWM inputs, one for each

side of the H-bridge. The MIC4606-1 and MIC4606-2

are available in a 16-pin 4 mm x 4 mm QFN package,

and a 16-pin 4 mm x 5 mm TSSOP package with an

operating temperature range of -40°C to +125°C.

Features

? 5.5V to 16V Gate Drive Supply Voltage Range

? Advanced Adaptive Dead Time

? Intelligent Shoot-Through Protection

? MIC4606-1: Four Independent TTL Inputs

? MIC4606-2: Two PWM Inputs

? Enable Input for On/Off Control

? On-Chip Bootstrap Diodes

? Fast 35 ns Propagation Times

? Drives 1000 pF Load with 20 ns Rise and

Fall Times

? Low Power Consumption: 235 μA Total Quiescent

Current

? Separate High-Side and Low-Side Undervoltage

Protection

? -40°C to +125°C Junction Temperature Range

Applications

? Full-Bridge Motor Drives

? Power Inverters

? High-Voltage Step-Down Regulators

? Distributed Power Systems

? Stepper Motors

MIC4606屬于集成電路（IC） > 柵極驅動器。微芯科技股份有限公司制造生產(chǎn)的MIC4606柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。