MM74HC175M集成電路（IC）的觸發(fā)器規(guī)格書PDF中文資料

General Description

The MM74HC175 high speed D-type flip-flop with comple mentary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads.

Information at the D inputs of the MM74HC175 is transferred to the Q and Q outputs on the positive going edge of the clock pulse. Both true and complement outputs from each flip flop are externally available. All four flip-flops are controlled by a common clock and a common CLEAR. Clearing is accomplished by a negative pulse at the CLEAR input. All four Q outputs are cleared to a logical “0” and all four Q outputs to a logical “1.”

The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.

Features

■ Typical propagation delay: 15 ns

■ Wide operating supply voltage range: 2–6V

■ Low input current: 1 μA maximum

■ Low quiescent supply current: 80 μA maximum (74HC)

■ High output drive current: 4 mA minimum (74HC)