MSK5021E中文資料MSK數據手冊PDF規(guī)格書

DESCRIPTION:

The MSK 5021 is a user adjustable voltage regulator capable of delivering 20 amps to a load with only a 0.5 volt dropout voltage rating. The output voltage is adjustable from 1.3 volts to 36 volts through the selection of two external resistors. Low dropout voltage ratings are achieved by employing a unique parallel MOSFET output pass transistor configuration which drives power dissipation down and efficiency up. Accuracy is guaranteed with a ±1 voltage tolerance at room temperature that only varies ±2 over temperature. A TTL level input can be used to enable/disable the device and a regulation dropout Fault pin provides a means of monitoring the output level. The MSK 5021 is packaged in a thermally efficient 12 pin power dip that can be bolted directly to a heat sink.

FEATURES:

Extremely Low Dropout Voltage: 0.50V @ 20 Amps

Output Voltage Adjustable from 1.3V to 36V with Two External Resistors

TTL Level Enable Pin

Externally Programmable Current Limit

Low Quiescent Current

Available Fully Qualified to Mil-PRF-38534

Output Current to 20 Amps

Regulation Dropout Fault Pin

TYPICAL APPLICATIONS

High Efficiency, High Current Linear Regulators

Adjustable Voltage/Current Regulators

System Power Supplies

Switching Power Supply Post Regulators