MT28F128J3FS-11中文資料鎂光數據手冊PDF規格書

GENERAL DESCRIPTION

The MT28F128J3 is a nonvolatile, electrically block erasable (Flash), programmable memory containing 134,217,728 bits organized as 16,777,218 bytes (8 bits) or 8,388,608 words (16 bits). This 128Mb device is organized as one hundred twenty-eight 128KB erase blocks. The MT28F640J3 contains 67,108,864 bits organized as 8,388,608 bytes (8 bits) or 4,194,304 words (16 bits). This 64Mb device is organized as sixty-four 128KB erase blocks.

Similarly, the MT28F320J3 contains 33,554,432 bits organized as 4,194,304 bytes (8 bits) or 2,097,152 words (16 bits). This 32Mb device is organized as thirty-two 128KB erase blocks.

These three devices feature in-system block locking. They also have common flash interface (CFI) that permits software algorithms to be used for entire families of devices. The software is device-independent, JEDEC ID-independent with forward and backward compatibility.

FEATURES

? x8/x16 organization

? One hundred twenty-eight 128KB erase blocks (128Mb)

Sixty-four 128KB erase blocks (64Mb)

Thirty-two 128KB erase blocks (32Mb)

? VCC, VCCQ, and VPEN voltages:

2.7V to 3.6V VCC operation

2.7V to 3.6V or 4.5V to 5.5V* VCCQ operation

2.7V to 3.6V, or 5V VPEN application programming

? Interface Asynchronous Page Mode Reads:

150ns/25ns read access time (128Mb)

120ns/25ns read access time (64Mb)

110ns/25ns read access time (32Mb)

? Enhanced data protection feature with VPEN = VSS Flexible sector locking Sector erase/program lockout during power transition

? Security OTP block feature Permanent block locking (Contact factory for availability)

? Industry-standard pinout

? Inputs and outputs are fully TTL-compatible

? Common Flash Interface (CFI) and Scalable Command Set

? Automatic write and erase algorithm

? 4.7μs-per-byte effective programming time using write buffer

? 128-bit protection register

64-bit unique device identifier

64-bit user-programmable OTP cells

? 100,000 ERASE cycles per block

? Automatic suspend options:

Block Erase Suspend-to-Read

Block Erase Suspend-to-Program

Program Suspend-to-Read