MX29LV017BTI-70G中文資料????????????旺宏數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The MX29LV017B is a 16-mega bit Flash memory organized as 2M bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29LV017B is packaged in 40-pin TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

? Extended single - supply voltage range 2.7V to 3.6V

? 2,097,152 x 8

? Single power supply operation

- 3.0V only operation for read, erase and program operation

? Fast access time: 70/90ns

? Fully compatible with MX29LV017A decice

? Low power consumption

- 30mA maximum active current

- 0.2uA typical standby current

? Command register architecture

- Byte Programming (9us typical)

- Sector Erase (Sector structure 64K-Byte x32)

? Auto Erase (chip & sector) and Auto Program

- Automatically erase any combination of sectors with Erase Suspend capability.

- Automatically program and verify data at specified address

? Erase suspend/Erase Resume

- Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.

? Status Reply

- Data# Polling & Toggle bit for detection of program and erase operation completion.

? Ready/Busy# pin (RY/BY#)

- Provides a hardware method of detecting program or erase operation completion.

? Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

- Temporary sector unprotect allows code changes in previously locked sectors.

? CFI (Common Flash Interface) compliant

- Flash device parameters stored on the device and provide the host system to access

? 100,000 minimum erase/program cycles

? Latch-up protected to 100mA from -1V to VCC+1V

? Low VCC write inhibit is equal to or less than 1.4V

? Package type:

- 40-pin TSOP

? Compatibility with JEDEC standard

- Pinout and software compatible with single-power supply Flash