The 8XC196MH is a member of Intel’s family of 16-bit MCS? 96 microcontrollers. It is designed primarily to control three-phase AC induction and DC brushless motors. It features an enhanced three-phase waveform generator specifically designed for use in “inverter” motor-control applications. This peripheral provides pulsewidth modulation and three-phase sine wave generation with minimal CPU intervention. It generates three complementary non-overlapping PWM pulses with resolutions of 0.125 μs (edge triggered) or 0.250 μs (centered).

■ High Performance CHMOS 16-bit CPU

■ 16 MHz Operating Frequency

■ 32 Kbytes of On-chip OTPROM/ROM

■ 744 Bytes of On-chip Register RAM

■ Register-to-register Architecture

■ 16 Prioritized Interrupt Sources

■ Peripheral Transaction Server (PTS) with 15

Prioritized Sources

■ Up to 52 I/O Lines

■ 3-phase Complementary Waveform Generator

■ 8-channel 8- or 10-bit A/D with Sample and Hold

■ 2-channel UART

■ Event Processor Array (EPA) with 2 High-speed

Capture/Compare Modules and 4 Highspeed Compare-only Modules

■ Two Programmable 16-bit Timers with

Quadrature Counting Inputs

■ Two Pulse-width Modulator (PWM) Outputs

with High Drive Capability

■ Flexible 8- or 16-bit External Bus

■ 1.75 μs 16 × 16 Multiply

■ 3 μs 32/16 Divide

■ Extended Temperature Available

■ Idle and Powerdown Modes

■ Watchdog Timer