The NCP/NCV51200 is a source/sink Double Data Rate (DDR)

termination regulator specifically designed for low input voltage and

low?noise systems where space is a key consideration.

The NCP/NCV51200 maintains a fast transient response and only

requires a minimum output capacitance of 20 F. The NCP/NCV51200

supports a remote sensing function and all power requirements for

DDR VTT bus termination. The NCP/NCV51200 can also be used in

low?power chipsets and graphics processor cores that require

dynamically adjustable output voltages.

The NCP/NCV51200 is available in the thermally?efficient DFN10

Exposed Pad wettable flank package, and is rated both Green and Pb?free.

Features

? For Automotive Applications

? Input Voltage Rails: Supports 2.5 V, 3.3 V and 5 V Rails

? PVCC Voltage Range: 1.1 to 3.5 V

? Integrated Power MOSFETs

? Fast Load?Transient Response

? PGOOD ? Logic output pin to Monitor VTT Regulation

? EN ? Logic input pin for Shutdown mode

? VRI ? Reference Input Allows for Flexible Input Tracking Either

Directly or Through Resistor Divider

? Remote Sensing (VTTS)

? Built?in Soft Start, Under Voltage Lockout and Over Current Limit

? Thermal Shutdown

? Small, Low?Profile 10?pin, 3x3 DFN Package

? NCV51200MWTXG (SFS), NCV51200MLTXG (SLP); ? Wettable

Flank Options for Enhanced Optical Inspection

? NCV Prefix for Automotive and Other Applications Requiring

Unique Site and Control Change Requirements; AEC?Q100

Qualified and PPAP Capable*

? These Devices are Pb?Free and are RoHS Compliant

Applications

? DDR Memory Termination

? Desktop PC’s, Notebooks, and Workstations

? Servers and Networking equipment

? Telecom/Datacom, GSM Base Station

? Graphics Processor Core Supplies

? Set Top Boxes, LCD?TV/PDP?TV, Copier/Printers

? Chipset/RAM Supplies as Low as 0.5 V

? Active Bus Termination

NCP51200屬于集成電路（IC） > 特殊用途穩壓器。安森美半導體公司制造生產的NCP51200特殊用途穩壓器該系列產品用于電源控制、某種形式的轉換，適用于特定的復雜應用。因此，各種產品特性集差異較大，包括空燃比傳感器接口、汽車交流發電機電壓調節、DDR 端接、液體透鏡控制、摩托車轉向信號控制、熱電 (peltier) 冷卻器控制、壓電觸覺控制、閥門控制、小型發動機管理等。