NCV70624集成電路（IC）的電機驅動器控制器規格書PDF中文資料
| 廠商型號 |
NCV70624 |
| 參數屬性 | NCV70624 封裝/外殼為20-SOIC（0.295"，7.50mm 寬）；包裝為卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶；類別為集成電路（IC）的電機驅動器控制器；NCV70624應用范圍：通用；產品描述：IC MTR DRV BIPOLR 6.5-29V 20SOIC |
| 功能描述 | 驅動器 - 全集成，控制和功率級 |
| 封裝外殼 | 20-SOIC（0.295"，7.50mm 寬） |
| 文件大小 |
685.39 Kbytes |
| 頁面數量 |
53 頁 |
| 生產廠商 | ON Semiconductor |
| 企業簡稱 |
ONSEMI【安森美半導體】 |
| 中文名稱 | 安森美半導體公司官網 |
| 原廠標識 |  |
| 數據手冊 | |
| 更新時間 | 2025-1-8 22:21:00 |
NCV70624規格書詳情
NCV70624屬于集成電路（IC）的電機驅動器控制器。由安森美半導體公司制造生產的NCV70624電機驅動器，控制器產品屬于電機驅動器和控制器電源管理集成電路 (PMIC) 系列，可用于控制或操作從某電源施加到電機或相關機電執行器的電源。所實現的具體功能和特性集根據預期負載和預期應用的特性有很大差異，范圍從用于有刷電機的簡單開環速度控制到基于步進電機的高級閉環運動控制。
INTRODUCTION
The AMIS?30624/NCV70624 is a single?chip micro?stepping
motor driver with a position controller and control/diagnostic
interface. It is ready to build intelligent peripheral systems where up to
32 drivers can be connected to one I2C master. This significantly
reduces system complexity.
The chip receives positioning instructions through the bus and
subsequently drives the stator coils so the two?phase stepper motor
moves to the desired position. The on?chip position controller is
configurable (OTP or RAM) for different motor types, positioning
ranges and parameters for speed, acceleration and deceleration.
Micro?stepping allows silent motor operation and increased
positioning resolution. The advanced motion qualification mode
enables verification of the complete mechanical system in function of
the selected motion parameters. The AMIS?30624/NCV70624 can
easily be connected to an I2C bus where the I2C master can fetch
specific status information like actual position, error flags, etc. from
each individual slave node.
An integrated sensorless step?loss detection prevents the positioner
from loosing steps and stops the motor when running into stall. This
enables silent, yet accurate position calibrations during a referencing
run and allows semi?closed loop operation when approaching the
mechanical end?stops.
The chip is implemented in I2T100 technology, enabling both high
voltage analog circuitry and digital functionality on the same chip.
The NCV70624 is fully compatible with the automotive voltage
requirements.
PRODUCT FEATURES
Motor Driver
? Micro?Stepping Technology
? Sensorless Step?Loss Detection
? Peak Current Up to 800 mA
? Fixed Frequency PWM Current?Control
? Selectable PWM Frequency
? Automatic Selection of Fast and Slow Decay Mode
? No external Fly?back Diodes Required
? 14 V/24 V Compliant
? Motion Qualification Mode (Note 1)
Controller with RAM and OTP Memory
? Position Controller
? Configurable Speeds and Acceleration
? Input to Connect Optional Motion Switch
I2C Interface
? Bi?Directional 2?Wire Bus for Inter IC Control
? Field Programmable Node Addresses
? Full Diagnostics and Status Information
Protection
? Overcurrent Protection
? Undervoltage Management
? Open?circuit Detection
? High Temperature Warning and Management
? Low Temperature Flag
EMI Compatibility
? High Voltage Outputs with Slope Control
Patents
? US 7,271,993
? US 7,288,956
? This is a Pb?Free Device
? NCV Prefix for Automotive and Other Applications
Requiring Site and Control Changes
產品屬性
更多- 產品編號：
NCV70624DW010R2G
- 制造商：
onsemi
- 類別：
集成電路（IC） > 電機驅動器，控制器
- 包裝：
卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶
- 電機類型 - 步進：
雙極性
- 功能：
驅動器 - 全集成，控制和功率級
- 輸出配置：
半橋（4）
- 接口：
I2C
- 技術：
功率 MOSFET
- 步進分辨率：
1/2，1/4，1/8，1/16
- 應用：
通用
- 電壓 - 供電：
6.5V ~ 29V
- 電壓 - 負載：
6.5V ~ 29V
- 工作溫度：
-40°C ~ 165°C（TJ）
- 安裝類型：
表面貼裝型
- 封裝/外殼：
20-SOIC（0.295"，7.50mm 寬）
- 供應商器件封裝：
20-SOIC
- 描述：
IC MTR DRV BIPOLR 6.5-29V 20SOIC
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
三年內 |
1983 |
只做原裝正品 |
詢價 | ||||
ON/安森美 |
22+ |
SOP20 |
100000 |
代理渠道/只做原裝/可含稅 |
詢價 | ||
ON/安森美 |
23+ |
NA/ |
3664 |
原裝現貨,當天可交貨,原型號開票 |
詢價 | ||
ON/安森美 |
24+ |
SOP20 |
4000 |
原裝現貨假一賠十 |
詢價 | ||
onsemi(安森美) |
23+ |
6000 |
誠信服務，絕對原裝原盤 |
詢價 | |||
ON/安森美 |
22+ |
SOP20 |
354000 |
詢價 | |||
ON |
SOP20 |
2000 |
一級代理 原裝正品假一罰十價格優勢長期供貨 |
詢價 | |||
ON(安森美) |
23+ |
NA |
20094 |
正納10年以上分銷經驗原裝進口正品做服務做口碑有支持 |
詢價 | ||
ON/安森美 |
22+ |
SOP |
6000 |
進口原裝 假一罰十 現貨 |
詢價 | ||
ON/安森美 |
19+ |
10000 |
原裝現貨支持BOM配單服務 |
詢價 |
