NM24C02U/03U中文資料仙童半導體數據手冊PDF規格書

General Description

The NM24C02U/NM24C03U are 2K (2,048) bit serial interface CMOS EEPROMs (Electrically Erasable Programmable Read Only Memory). These devices fully conform to the Standard I2C? 2-wire protocol which uses Clock (SCL) and Data I/O (SDA) pins to synchronously clock data between the master (for example a microprocessor) and the slave (the EEPROM device). In addition, the serial interface allows a minimal pin count packaging designed to simplify PC board layout requirements and offers the designer a variety of low voltage and low power options.

NM24C03U incorporates a hardware Write Protect feature, by which, the upper half of the memory can be disabled against programming by connecting the WP pin to VCC. This section of memory then effectively becomes a ROM (Read-Only Memory) and can no longer be programmed as long as WP pin is connected to VCC.

Fairchild EEPROMs are designed and tested for applications requiring high endurance, high reliability and low power consumption for a continuously reliable non-volatile solution for all markets.

Functions

■ I2C? compatible interface

■ 2,048 bits organized as 256 x 8

■ Extended 2.7V – 5.5V operating voltage

■ 100 KHz or 400 KHz operation

■ Self timed programming cycle (6ms typical)

■ Programming complete indicated by ACK polling

■ NM24C03U: Memory Upper Block Write Protect pin

Features

■ The I2C? interface allows the smallest I/O pincount of any EEPROM interface

■ 16 byte page write mode to minimize total write time per byte

■ Typical 200μA active current (ICCA)

■ Typical 1μA standby current (ISB) for L devices and 0.1μA standby current for LZ devices

■ Endurance: Up to 1,000,000 data changes

■ Data retention greater than 40 years