NTCLE350E4303XHB0中文資料威世科技數(shù)據(jù)手冊PDF規(guī)格書

FEATURES

? Advanced NTC ceramic technology

? Wide temperature range from -55 °C to +185 °C

? Cost efficient thermistor design

? Small body diameter of maximum 2.4 mm

? Fast response time and high sensitivity

? Improved noxious gas and acid resistance

? Insulated Ag-plated NiFe alloy leads

? Mounting: radial

? AEC-Q200 qualified (rev. D)

? Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

NTCLE350 can be processed by potting or molding into

sensors for electric traction motors, for example in the

sensing and protection of high current connectors.

NTCLE350 is suitable for EGR applications (exhaust gas

recirculation) for steady state temperatures going up to

185 °C.

This series is also intended for oil temperatures sensors

(OTS), in for example transmission systems and liquid

cooled starter/generator systems.

The AEC-Q200 qualification (between -55 °C and 185 °C)

enables this series to be used for classical motor thermal

sensing applications (engine coolant, fuel sensor, TMAP for

manifold air pressure) as well as in HVAC applications.

DESCRIPTION

These negative temperature coefficient thermistors consist

of a mini-chip soldered between two AWG #32 PEEK

insulated silver plated NiFe alloy leads and coated with

black colored epoxy lacquer. High adhesive strength

between PEEK wire and encapsulating lacquer.