NTS0102DP-Q100集成電路（IC）的轉(zhuǎn)換器電平移位器規(guī)格書PDF中文資料

General description

The NTS0102-Q100 is a 2-bit, dual supply translating transceiver with auto direction

sensing, that enables bidirectional voltage level translation. It features two 2-bit inputoutput

ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and

VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B)

can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for

translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V, and 5.0 V). Pins An

and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at

pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully

specified for partial power-down applications using IOFF. The IOFF circuitry disables the

output, preventing the damaging backflow current through the device when it is powered

down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

? Automotive product qualification in accordance with AEC-Q100 (Grade 1)

– Specified from –40 °C to +85 °C and from –40 °C to +125 °C

? Wide supply voltage range:

– VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V

? Maximum data rates:

– Push-pull: 50 Mbit/s

? IOFF circuitry provides partial power-down mode operation

? Inputs accept voltages up to 5.5 V

? ESD protection:

– MIL-STD-883, method 3015 Class 2 exceeds 2500 V for A port

– MIL-STD-883, method 3015 Class 3B exceeds 8000 V for B port

– HBM JESD22-A114E Class 2 exceeds 2500 V for A port

– HBM JESD22-A114E Class 3B exceeds 8000 V for B port

– CDM JESD22-C101E exceeds 1500 V

? Latch-up performance exceeds 100 mA per JESD 78B Class II

? Multiple package options

Applications

? I2C/SMBus

? UART

? GPIO